Lowrance 7200c Mode D’Emploi

31 

out of the box with the factory default settings. But, if you want to 
learn about the various options, see Sec. 5, System Setup and GPS 
Setup Options. 
You can access the Main Menu from any of the three Page screens by 

pressing 

|

. To clear the menu screen and return to the page 

display, press 

. 

 

The Main Menu commands and their functions are: 
Screen command: changes the contrast or brightness of the screen. 
Sounds command: enables or disables the sounds for key strokes and 

alarms and sets the alarm style. 
Transparency command: adjusts the level of transparency for menus.  
Alarms command: turns GPS alarms on or off and changes alarm 

thresholds. 
Route Planning command: used to plan, view or navigate a route. 
My Trails command: shows, hides, creates and deletes plot trails. Also 

used to navigate or backtrack a trail. 
Cancel Navigation command: turns off the various navigation com-

mands. Used to stop navigating after you have reached your destina-

tion waypoint, Point of Interest or map cursor location; or after you 

reach the end of a route or trail. 
GPS Setup command: sets various GPS receiver options. 
System Setup command: sets general configuration options. 
Sun/Moon Calculations command: finds the rising and setting time 

of the sun and the moon.