Sansui HDLCD2650 Mode D'Emploi

1

To turn on the TV, press POWER (POWER 

indicator on the front of the unit changes blue. 

It may take approx. 10 seconds for a picture to 

appear on screen.). The Auto Setup function 

begins.

Signal Type

Cable

Automatic Search

Start

2

Press ◀ or ▶ to select “Cable” or “Air”.

3

Press ▲ or ▼ to select “Automatic Search”, then 

press ▶ or ENTER. 

4

“Auto Setup” will begin. After the Auto Setup 

is completed, the TV channel appears on the 

screen.

Depending on the reception condition, it may 

take up to 30 minutes to complete memorizing 

digital cable channels. Please allow the 

process to complete without interruption.

•

If you press EXIT/CANCEL in the process of “Auto 

Setup”, the Auto Setup stops and changes to the 

normal screen.
When you make a menu selection, your changes 

occur immediately. You do not have to press EXIT/

CANCEL to see your changes.

TV operation
1

To turn on the TV, press POWER. (POWER 

indicator on the front of the unit changes blue. 

It may take approx. 10 seconds for a picture to 

appear on screen.)

2

Adjust the volume level by pressing VOL + or – . 

The volume level will be indicated on the screen 

by green bars. As the volume level increases, so 

do the number of bars. If the volume decreases, 

the number of green bars also decreases.

3

Set the Signal Type option to the appropriate 

position (see “Air/Cable selection” on page 18).

4

Press the Direct Channel Selection (0-9, –) 

buttons to select the channel.

(If you press only channel number, channel 

selection will be delayed for a few seconds.)

•

•

1-9: 

Press 1-9 as needed. Example, to 

select channel 2, press 2, then press 

ENTER.

10-99: 

Press the 2 digits in order. Example, 

to select channel 12, press 1, 2, then 

press ENTER.

100-135:  Press the 3 digits in order. Example, to 

select channel 120, press 1, 2, 0, then 

press ENTER.

Press the first 1-3 digits, then press the – button, 

followed by the remaining number.

Example, to select channel 15-1, press 1, 5, –, 1, 

then press ENTER.

If a channel is selected with only audio content, 

“Audio only” will be displayed on the screen.

If a channel is selected with a weak digital 

signal, “Digital channel signal strength is low” 

will be displayed on the screen.

  The same program may be available on either 

an analog channel or a digital channel. You may 

choose to watch either format.

If a channel is selected to which you have not 

subscribed, “Digital channel is encrypted” will 

be displayed on the screen.

•

•

•

VHF

2-13

VHF

2-13

UHF

14-69

STD/HRC/IRC

14-36 (A) 

(W)

37-59 (AA) 

(WW)

60-85 (AAA) 

(ZZZ)

86-94 (86) 

(94)

95-99 (A-5) 

(A-1)

100-135 (100) 

(135)

01 (4A)

If a channel with no broadcast is selected, the 

sound will automatically be muted.

It may take a few seconds for a digital channel 

picture to appear on screen after being selected.

To view a signal from another device connected 

to your TV, such as a VCR player, press INPUT 

SELECT, then press ▲ or ▼ or corresponding 

Number buttons (0-5), then press ENTER. You 

can select TV, Video, Component, HDMI, PC or DVD 

depending on which input jacks you used to connect 

your devices.

 

Press and release CH

. The channel 

automatically stops at the next channel set into 

memory.

For proper operation, before selecting channels, they 

should be set into the memory. See “Memorizing 

channels” on page 18.

•

•

57B0721A_eng.indd   15

57B0721A_eng.indd   15

4/2/11   10:43:03 AM

4/2/11   10:43:03 AM