Navman icn600 Mode D'Emploi
2
1
a
b
Click
10
iCN 600 series | User Manual
G
et
tin
g
st
ar
te
d
3. Positioning the iCN in a Vehicle
The iCN can be mounted in a vehicle two ways:
1. By suction on the windscreen;
2. By suction, adhesive tape and screws drilled directly into the dashboard.
Note: This is a permanent solution and will mark your dashboard.
2. By suction, adhesive tape and screws drilled directly into the dashboard.
Note: This is a permanent solution and will mark your dashboard.
Follow the safety guidelines on page 7 to ensure that the iCN does not obstruct the driver’s view or
interfere with the operation of vehicle airbags and safety devices.
interfere with the operation of vehicle airbags and safety devices.
Suction Mount
Assembling the iCN Suction-Mount
Choose a position on the windshield that is clearly visible to the driver without obstructing the
view of the road.
view of the road.
1. Assemble the suction-mount:
• Slip the locking-nut over the ballfoot.
• Snap the socket-clip onto the ballfoot.
• Screw the locking-nut onto the thread of the socket-clip until firm.
• Snap the socket-clip onto the ballfoot.
• Screw the locking-nut onto the thread of the socket-clip until firm.
2. Use the alcohol swab to clean and dry the suction-cup and the mounting-area on the
windshield, then attach the suction-mount to the windshield:
a. Hold the suction-cup firmly against the windshield; and
b. Press the lever towards the suction-cup.
b. Press the lever towards the suction-cup.