Extreme x250e-24p Manuel De Montage
Summit Family Switches Hardware Installation Guide
149
NOTE
The ExtremeXOS software also recognizes standards-based CX-4 XENPAKs; contact your CX-4 module vendor to
obtain these.
obtain these.
Mixing ZR XENPAKs with Other Types
series switch. You can either install one ZR XENPAK and leave one slot empty or install one ZR
XENPAK and one SR XENPAK; the Summit X450 series switch does not support any other XENPAK
combinations when a ZR XENPAK module is installed. You must put the specified modules in the
specified slots, as shown in
XENPAK and one SR XENPAK; the Summit X450 series switch does not support any other XENPAK
combinations when a ZR XENPAK module is installed. You must put the specified modules in the
specified slots, as shown in
, for the switch to discover the ZR XENPAK correctly.
.
Summit XGM2-2xn Option Card
The Summit XGM2-2xn option card allows you to add up to two 10-gigabit XENPAK modules to the
following switches:
following switches:
●
Summit X450a-24t switch, running ExtremeXOS 11.5.0 (or later)
●
Summit X450a-24tDC switch, running ExtremeXOS 11.5.0 (or later)
●
Summit X450a-24x switch, running ExtremeXOS 11.6.1 (or later)
●
Summit X450a-24xDC switch, running ExtremeXOS 11.6.1 (or later)
●
Summit X450a-48t switch, running ExtremeXOS 11.5.0 (or later)
●
Summit X450e-24p switch, running ExtremeXOS 11.5.0 (or later)
●
Summit X450e-48p switch, running ExtremeXOS 11.6.1 (or later)
The Summit XGM2-2xn option card is compatible with the following 10-gigabit XENPAK modules:
●
SR XENPAK module, operating in the 850 nm range
●
LR XENPAK module, operating in the 1310 nm range
●
ER XENPAK module, operating in the 1550 nm range
●
ZR XENPAK module, operating in the 1550 nm range
●
LX-4 XENPAK module, operating in the 1269-1355 nm range
●
LW XENPAK module, operating in the 1310 nm range
shows the Summit XGM2-2xn option card.
Table 24: Summit X450 ZR XENPAK Combinations
Left Slot
Right Slot
ZR XENPAK
Empty
ZR XENPAK
SR XENPAK