Daewoo dvd9000n Manuel Du Propriétaire
• 38 •
FUNCTION SETTING (Continued)
- -SPEAKER SETUP PAGE - -
SPEAKER SETUP
DOWNMIX
>> LT/RT
>> STEREO
>> VSS
>> OFF
>> STEREO
>> VSS
>> OFF
CENTER
>> ON
>> OFF
>> OFF
REAR
>> ON
>> OFF
>> OFF
SUBWOOFER
>> ON
>> OFF
>> OFF
CNTR DELAY
>> 5MS
>> 3MS
>> 1MS
>> OFF
>> 3MS
>> 1MS
>> OFF
REAR DELAY
>> 15MS
>> 9MS
>> 3MS
>> OFF
>> 9MS
>> 3MS
>> OFF
TEST TONE
>> ON
>> OFF
>> OFF
DOWNMIX (Dolby Digital DVD disc only)
DOWNMIX is used to reproduce the proper
analog audio when the audio channel
recorded on the disc differs from the output
audio channel configuration. Assume that 5.1
channels audio are recorded on the disc but
you can receive only stereo audio channels. In
this case downmix is unavoidable and you
will hear all the channels recorded on disc. If
you are using Dolby Surround Pro Logic
decoder, please set the downmix mode to
LT/RT. And the last sub item stereo makes the
downmixing operation stops. This means that
you are using the full 5.1 channel audio
system. If you donÕt have an amplifier, which
have Dolby Digital, dts decoder or 5.1
channel analog audio input, do not select this
stereo sub item. If you do that you may hear
the front stereo sound only. Select this stereo
sub item when you are going to use the full
5.1 channel analog audio with your amplifier.
analog audio when the audio channel
recorded on the disc differs from the output
audio channel configuration. Assume that 5.1
channels audio are recorded on the disc but
you can receive only stereo audio channels. In
this case downmix is unavoidable and you
will hear all the channels recorded on disc. If
you are using Dolby Surround Pro Logic
decoder, please set the downmix mode to
LT/RT. And the last sub item stereo makes the
downmixing operation stops. This means that
you are using the full 5.1 channel audio
system. If you donÕt have an amplifier, which
have Dolby Digital, dts decoder or 5.1
channel analog audio input, do not select this
stereo sub item. If you do that you may hear
the front stereo sound only. Select this stereo
sub item when you are going to use the full
5.1 channel analog audio with your amplifier.
CENTER
This submenu is valid when you are
using an amplifier, which have the 5.1
channel analog audio input. If you have
the center speaker, please turn the sub
item ON. If not, turn OFF. If you are
going to adjust the center delay, please
turn the sub item ON. If not, you canÕt
adjust the center delay.
using an amplifier, which have the 5.1
channel analog audio input. If you have
the center speaker, please turn the sub
item ON. If not, turn OFF. If you are
going to adjust the center delay, please
turn the sub item ON. If not, you canÕt
adjust the center delay.
REAR
This submenu is valid when you are
using an amplifier, which have the 5.1
channel analog audio input. If you have
the rear speaker, please turn the sub item
ON. If not, turn OFF. If you are going to
adjust the rear delay, please turn the sub
item ON. If not, you canÕt adjust the rear
delay.
using an amplifier, which have the 5.1
channel analog audio input. If you have
the rear speaker, please turn the sub item
ON. If not, turn OFF. If you are going to
adjust the rear delay, please turn the sub
item ON. If not, you canÕt adjust the rear
delay.
SUBWOOFER
This submenu is valid when you are using
an amplifier, which have the 5.1 channel
analog audio input. If you have the
subwoofer speaker, please turn the sub
item ON. If not, turn OFF.
an amplifier, which have the 5.1 channel
analog audio input. If you have the
subwoofer speaker, please turn the sub
item ON. If not, turn OFF.
CNTR DELAY
You can adjust the sound in home by
adding delay time to the center speaker.
See REAR DELAY for more information.
adding delay time to the center speaker.
See REAR DELAY for more information.
Notes:
If you want to select CENTER, REAR
SUBWOOFER, CNTR DELAY, REAR
DELAY and TEST TONE, Downmix
should be set to the ÒOFFÓ.
SUBWOOFER, CNTR DELAY, REAR
DELAY and TEST TONE, Downmix
should be set to the ÒOFFÓ.