Intermec 10I2 Mode D'Emploi
EasyLAN User’s Guide
75
Chapter 6 — Advanced Confi guration
TRAP_TNAME
Friendly trap names.
TRAPADDR
Trap Address. Th
is is the IP address of the
receiver of SNMP Traps.
TRAPPORT
SNMP Trap port. Default port to send
SNMP Traps.
SNMP Traps.
.TSIG_KEY
TSIG key (for DDNS with TSIG)
.TSIG_KEYNAME
Name of the TSIG encryption key.
WINS_ADDR1
Primary
WINS
Server.
WINS_ADDR2
Secondary WINS Server.
.WRT_COM
Write Community. Community with rights
to read and write SNMP MIBs.
to read and write SNMP MIBs.
Example:
SETUP "lan1","RTEL_PR1","9100"
wlan Section
Objects starting with a dot (.) cannot be read if the current user does not
have rights to read/set protected wlan settings.
have rights to read/set protected wlan settings.
Objects Description
SSID
Service Set Identifi er (0-32 characters).
WEP 1-4
WEP keys 1 to 4 (alphanumerical or
hexadecimal).
hexadecimal).
.WEP_KEY
Select WEP key (0 disables WEP; 1-4 selects
transmission key).
transmission key).
AUTH
Set the network authentication subtype to
Shared or Open.
Shared or Open.
WPA
Set the status of WPA to “on” or “off ”.
WPA_PSK
Set or remove the Pre-Shared Key (PSK).
ROAM
Set the network adapter’s roaming
inclination (1-3, a high value will make the
adapter less inclined to switch access points)
inclination (1-3, a high value will make the
adapter less inclined to switch access points)
CHANNEL
Read current channel.