Intermec 5055 Mode D'Emploi
Introduction
SECTION 1
1-8 5055 Data Collection PC User’s Guide
Headphone
This 3.5 mm connector accepts an external headphone.
Network Connection (NET)
The Intermec 5055 Data Collection PC has Ethernet
(10BASE-T, RJ-45 jack) on board.
B CAUTION:
Use spinning-media PC Cards for fixed-mount applications
only.
WARNING:
Both edges of PC cards must be in the correct grooves in the
drive to avoid damage to the card or to the computer.
WARNING:
To prevent damaged pins, do NOT force PC cards or the IDE
drive into their respective slots.
Card/Drive Slots
Remove the antenna connector panel to access the card/
drive slots. When reinstalling the panel, carefully dress an-
tenna cables into the slots to guard against damage.
IDE Drive Bay
A special metal carrier adapts most currently available
miniature (2.5 inch) IDE type drives to this bay. The metal
carrier has a tab that securely holds the drive in place.
PC Card Slots (PCMCIA)
These user-accessible slots (0 and 1) are for PC Card de-
vices. Each 68-pin slot can accommodate a Type I, II, or III
device.
Radio Antenna Connectors (RF)
All connector locations are shown, however one or more of
them may be plugged depending upon the radio(s) in your
computer. The computer has an antenna mounting bracket
at the top of the unit.