Intermec 6622 Mode D'Emploi

SECTION 4

Operating the Pen Computer

4-8

PEN*KEY

6622 Pen Computer User’s Guide

also adjust the backlight brightness, set suspend execution, etc. In
addition, the icon changes to an AC charger icon when the pen com-
puter is being powered by the AC adapter/recharger. For details, re-
fer to ”Pen*Key Tool” on page 3-6.)
The average remaining capacity of the two battery packs can be
checked by tapping on ”Control Panel” under ”settings” in the Start
menu and then double tapping the ”Power Management” icon.
When two fully charged battery packs are installed, the value indicated
will be 100%. Therefore, if only one fully charged battery pack is
installed, the value indicated will be 50%.
If the AC adapter/recharger is connected, the remaining capacity of
the battery packs is not displayed.

Double tapping on the battery setting panel icon displays the
battery meter.

NOTE:

The remaining capacity that is displayed is based on the battery voltage;

some error in the reading might be present under certain conditions. The

length of time a battery can power the system will also vary according to

how the system is used and which applications are being run, so the

indications of the remaining battery capacity should only be used as a

rough guide.

NOTE:

If a battery pack is being recharged, the display of the remaining battery

capacity will not be accurate.