Intermec 2430 Mode D'Emploi
Chapter 6—Configuration Command Reference
Trakker Antares 2400 Family System Manual
157
7
For the Donation ID Number or the National Use Bar Code, scan an
alphanumeric bar code from the “Full ASCII Bar Code Chart” on page
284.
alphanumeric bar code from the “Full ASCII Bar Code Chart” on page
284.
• For the Donation ID Number, scan a value from 0 through 9 or
uppercase A through Z.
• For the National Use Bar Code, scan a value from lowercase a
through z.
8
If you want to keep the default concatenation control parameters, go to
Step 10.
Step 10.
• The default concatenation distance is 16 mm
± 0 mm.
• The default concatenation decode time limit is 160 ms.
If you want to set the concatenation control parameters, follow these
instructions:
instructions:
• To set the concatenation decode time limit, scan these bar codes to
set the time from 001 to 999 ms.
• To set the concatenation distance, scan these bar codes to set the
distance from 00 to 99 mm and the tolerance from
± 1 to 9 mm.
*0*
*1*
*0*
*1*
*2*
*3*
*2*
*3*
*4*
*5*
*4*
*5*
*6*
*7*
*6*
*7*
*8*
*9*
*8*
*9*
9
Scan one of these bar codes to set the concatenation distance or time
limit:
limit:
Distance
Time
*+D*
*+T*
*d*
*t*
10
Scan this bar code:
Exit Accumulate Mode
*-/*
*-/*