Citel 6000 Mode D'Emploi
PBXgateway
™
& EXTender
TM
6000 System Administrator’s Guide
2 5 8
Getting Started on a RemoteConneX Phone
Congratulations on your purchase of the RemoteConneX
TM
Phone. This Quick Reference Guide will
assist you when using the office functionality of your phone.
Important: In order to use the RemoteConneX Phone, you must perform the first use setup procedure
outlined in the RemoteConneX Phone User Guide!
Important: In order to use the RemoteConneX Phone, you must perform the first use setup procedure
outlined in the RemoteConneX Phone User Guide!
The login Procedure
1. Raise the handset, or press the Speaker key. The following menu will appear:
Timer: 00:03
RemoteConneX
Login
Flash
Reset
2. Press the Login Softkey.
3. When prompted to enter your password, enter the password and press the OK softkey. If you do not
3. When prompted to enter your password, enter the password and press the OK softkey. If you do not
know your password, refer to the ‘Personal RemoteConneX Info’ section or contact your System
Administrator. A password is optional but highly recommended.
Administrator. A password is optional but highly recommended.
4. You are now logged into the system and should be able to see the PBX: Idle Menu.
There are two methods to use your phone for office functionality:
• Logging in and staying connected at all times.
• Not logging in and using Dialback functionality to make/ receive office calls.
• Not logging in and using Dialback functionality to make/ receive office calls.
Dialback Instructions
The Dialback number is the telephone number that the ConneX PBXgateway uses to reach you at your
home location. Incoming calls to your office extension are routed to the Dialback number currently set.
Refer to the ‘Personal RemoteConneX Info’ section to find out if you need to set your own Dialback
number.
home location. Incoming calls to your office extension are routed to the Dialback number currently set.
Refer to the ‘Personal RemoteConneX Info’ section to find out if you need to set your own Dialback
number.
Dialback Setup Instructions
1. From
the
PBX: Idle menu, press the Admin softkey.
2. Press
the
SetDB softkey.
3. Enter your 10-digit phone number as if you were sitting at your office attempting to call home. Include any prefix
numbers such as ‘9’ or ‘1’ (i.e 9-1-xxx-xxx-xxxx) when setting the number.
4. Press
the
Enter softkey to store.
5. Press
the
CheckDB softkey to replay.