Megxon s300 Mode D'Emploi
Before Shooting
8
E N
Loading the batteries and SD Memory Card
This camera uses 2 AA alkaline or NiMH batteries. The batteries and SD card share the same
compartment and door
compartment and door
.
CAUTION!
1.To improve battery performance, replace all
installed batteries at the same time and keep batter
way from heat.
2.To abandon batteries, please refer to index of bat-
tery manufacturer.
3. Do not mix battery types or it may cause a fire or
explosion. Use only one battery type at one time
4. Batteries should be inserted in the battery compart-
ment with the "+" and "-" sides facing correctly.
installed batteries at the same time and keep batter
way from heat.
2.To abandon batteries, please refer to index of bat-
tery manufacturer.
3. Do not mix battery types or it may cause a fire or
explosion. Use only one battery type at one time
4. Batteries should be inserted in the battery compart-
ment with the "+" and "-" sides facing correctly.
NOTE:
1. Upon loading new batteries, users will need to
reset their Basic Settings
2. Do not open the battery/SD card cover or
remove the batteries when the camera is in its
ON status. Only remove the batteries and SD
card when the camera is not in use, or in its
OFF status.
ON status. Only remove the batteries and SD
card when the camera is not in use, or in its
OFF status.
3. If you do not plan on using the camera for a
long period of time, please remove the batter-
ies and SD card.
ies and SD card.
1.
Slide the battery/SD Memory Card cover
then lift to open.
in the direction of the arrow,
2.
Load the included batteries
into the battery compartment.
4.
Close the battery/SD Memory Card cover.
3.
Insert the SD Memory card into the slot.