SATO M5900RVe Manuel D’Utilisation
Unit 6: Maintenance
SATO M5900RVe Operator Manual
PN 9001125A
Page 6-8
PRINT HEAD ALIGNMENT
Print head position has a direct impact on print quality. An improperly aligned print head will
cause the print to be inconsistent across the label. The following procedure will provide guidance
on print head alignment.
cause the print to be inconsistent across the label. The following procedure will provide guidance
on print head alignment.
1 Remove power and disconnect the power supply cord.
2 Open the right housing cover to access and open the print assembly (1, Figure 6-6).
3 Detach lever guard (2), loosen two set screws (3), and one mounting screw (4).
4 Manipulate print head assembly (5) so that it is parallel with platen roller (6).
5 Secure mounting screw (4), two set screws (3), and attach lever guard (2).
6 Close the right housing cover and restore power.
2 Open the right housing cover to access and open the print assembly (1, Figure 6-6).
3 Detach lever guard (2), loosen two set screws (3), and one mounting screw (4).
4 Manipulate print head assembly (5) so that it is parallel with platen roller (6).
5 Secure mounting screw (4), two set screws (3), and attach lever guard (2).
6 Close the right housing cover and restore power.
Figure 6-6, Print Head Alignment
2
1
4
3
6
1
5