IBM il v300 Manuel D’Utilisation
For more information regarding Aspect Ratio, see “Connecting a video device”
v
Presets
: Presets are provided that optimize the projector for displaying computer
presentations, photographs, film images, and video images. Film input is
material originally captured on a film camera, like a movie; video input is
material originally captured on a video camera, like a TV show or sporting
event. You can use the preset as a starting point, then further customize the
settings for each source. The settings you customize are saved in the preset for
each source. To restore the factory default settings, choose Factory Reset in the
Settings>Service
material originally captured on a film camera, like a movie; video input is
material originally captured on a video camera, like a TV show or sporting
event. You can use the preset as a starting point, then further customize the
settings for each source. The settings you customize are saved in the preset for
each source. To restore the factory default settings, choose Factory Reset in the
Settings>Service
menu. For more information, see “Settings menu” on page 5-5.
There is also a user-definable preset. To set a preset for the current source, adjust
the image, select Save Settings in the Presets menu, choose one of the locations
in the Save Settings menu, and exit out of the menu. You can recall these
settings in the future by selecting the User 1 preset. (See Figure 5-7.)
the image, select Save Settings in the Presets menu, choose one of the locations
in the Save Settings menu, and exit out of the menu. You can recall these
settings in the future by selecting the User 1 preset. (See Figure 5-7.)
Advanced menu
v
Sharpness
: (This menu is only for video sources.) Changes the clarity of the
edges of a video image. Select a sharpness setting from the Sharpness menu,
shown in Figure 5-8.
shown in Figure 5-8.
Figure 5-6. Aspect Ratio menu
Figure 5-7. Presets and Save Settings menus
Figure 5-8. Sharpness menu
Chapter 5. Using the menus
5-3