IBM i series 1400 Mode D'Emploi
Frequently Asked Questions
My screen keeps blanking when I do not want it to. How do I stop this?
You can change the power management timers with the Power Mangement
Properties window.
Properties window.
1. Press Fn+F2.
2. Set a longer time-out value for "Turn off monitor".
3. Click OK.
How can I use an external mouse when I am at my desk, but then use
the TrackPoint when I am away from my desk?
the TrackPoint when I am away from my desk?
For a PS/2 mouse:
Connect the PS/2 mouse. The TrackPoint is automatically disabled. To use
the TrackPoint again, disconnect the PS/2 mouse.
the TrackPoint again, disconnect the PS/2 mouse.
For a serial mouse:
To use a serial mouse, do as follows:
1. Save your work and quit any program you are using.
2. Connect the serial mouse.
Note: If you have not previously installed a serial mouse, you need to
install the serial mouse device driver. See “Attaching an External
Mouse or Numeric Keypad” on page 59 for instructions.
Mouse or Numeric Keypad” on page 59 for instructions.
3. Restart the computer.
For a USB mouse:
To use a USB mouse, do as follows:
1. Save your work and quit any program you are using.
2. Connect the USB mouse.
Note: You can use the TrackPoint with the external serial or USB mouse
simultaneously.
Why do I not get the highest possible resolution out of my external
monitor when I am using the LCD and external monitor at the same
time?
monitor when I am using the LCD and external monitor at the same
time?
Solving Computer Problems
85