IBM il c300 Manuel D’Utilisation
8.
Replace the lamp door by sliding the tabs into the tab bays and tightening the
two screws.
two screws.
9.
Plug in the power cable, then press the Power button to turn the projector
back on.
back on.
10.
Reset the lamp hour timer.
Resetting the lamp timer
If the lamp timer has reached the maximum number of hours for the projector
lamp (3,000 hours), the LED on the projector’s keypad will show a lamp error (see
Appendix B, “Troubleshooting your setup”, on page 27). To reset the lamp age,
simultaneously hold down the two Volume keys on the projector’s keypad for 10
seconds. At that point the LED will turn green and you can power on the projector.
lamp (3,000 hours), the LED on the projector’s keypad will show a lamp error (see
Appendix B, “Troubleshooting your setup”, on page 27). To reset the lamp age,
simultaneously hold down the two Volume keys on the projector’s keypad for 10
seconds. At that point the LED will turn green and you can power on the projector.
You can also navigate to the Settings -> Service menu and select Lamp Reset to
reset the lamp timer.
reset the lamp timer.
Using the security lock
The projector has a security lock for use with a PC Guardian Cable Lock Refer to
the information that came with the lock for instructions on how to use it.
the information that came with the lock for instructions on how to use it.
computer 1
computer 2
video
monitor out
network
serial control
audio in
audio in
audio in
audio out
R
R
L
L
Y
Pr
Pb
s-video
computer in
1 Security lock
26
IBM iLC300 Conference Projector: IBM iLC300 Conference Projector User’s Guide