Invicta 0003 Mode D'Emploi

WATCHES WITH

ALARM

Setting the Reference Time

2. Press the push-button for at least 2 seconds. Until the small minute

hand jumps forward one minute and setting mode is activated.
Short pressing: Less than 1 second:

The reference time is moved forward by the minute.
Medium pressing: 1-2 seconds:

The reference time is moved forward by the hour.
Long pressing: Longer than 2 seconds:

The reference time is moved forward until the push-button is released.

3. Push the crown back into position 0. To set it to the exact second,

the crown must be pushed back into position 0 at the exact second.

The display changes from reference time to alarm time. A signal indicates

that the alarm is switched off.

WATCHES WITH

ALARM

Setting the Reference Time

Parallel to the current time, the reference time runs in the background: the

alarm time refers itself to this reference time. Thus, resetting the time also

requires the identical correction of the reference time.If the reference time

is not synchronized with the current time, this results in the alarm signal

being emitted at a different time than the set alarm time.

1. Pull out the crown to position 2. The second hand stops. The display

changes from alarm time to reference time. To set your watch to the

exact second, the crown must be pulled out when the second hand is

in position 0.