Manualsbrain.com
  1. Manuels
  2. Marques
  3. Q-See
  4. qsc1352c4
  5. Mode D'Emploi

Q-See qsc1352c4 Mode D'Emploi

Télécharger
Page de 1
Weatherproof Color Camera
for Indoor and Outdoor Use
User Manual
PRECAUTIONS:
CAUTION! Risk of electrical shock. To prevent electric 
shock, do not remove screws or cover.
Handle camera with care. Do not hit, shake, puncture 
or drop the camera as this could cause damage and 
prevent proper operation.
Do not attempt to disassemble camera. There are 
no user serviceable parts inside. Service should be 
performed by a qualified Q-See technician only.  
Avoid excessive moisture within camera or 
adapters. Do not use strong or abrasive detergents 
when cleaning camera body. Clean with dry cloth or mild 
detergent, wiping gently. 
Do not use camera beyond prescribed voltage range. 
Only use included power supply. Ensure power input 
source conforms to local voltage. Voltage outside of 
range could cause damage or abnormal performance. 
Avoid strong light. Do not aim camera at sun or aim 
strong light directly into the lens as it will degrade image 
quality and could cause damage. Camera should ideally 
be placed out of direct sunlight for improved performance.
Protect from elements. These cameras are 
weatherproof but direct exposure to excessive rain, sun 
or marine environmental conditions will degrade their 
performance and shorten the life of the product.
LEGAL:
Trademarks: All brand names and products are trademarks 
or registered trademarks of their respective owners.
Q-See is a registered trademark of DPS, Inc.
Disclaimer: The information in this document is subject 
to change without notice. The manufacturer makes no 
representations or warranties, either express or implied, of any 
kind with respect to  completeness of its contents.
Manufacture shall not be liable for any damages whatsoever 
from misuse of this product.
DISPOSAL:
If the camera no longer functions or can no longer 
be repaired, it must be disposed of according 
to regulations regarding electronic waste. By 
not disposing of electronic items in household 
waste you will not only be following the law, but 
contributing to the protection of the environment.
Digital Peripheral Solutions, Inc.                         
8015 E. Crystal Dr., Anaheim, CA 92807
1-877-998-3440 • www.q-see.com       
Q-See Customer Support (USA)
FAQ, videos, guides 24/7 & live chat (M-F 9-5pm PST) 
at www.q-see.com • 
e-mail: support@dpsi-usa.com
A single camera can be connected directly to a 
monitor or TV using the included cable and adapter.
For TV: Tune to correct INPUT (ie; A/V, L1, L2, 
Source) Consult TV manual for details.
CAMERA
TV or MONITOR
Depending on your TV or monitor, you may 
need to use the included BNC-to-RCA adapter 
(below) to connect the yellow plug on the 
camera cable to your screen.
CONNECT TO A TV OR 
MONITOR:
EXTENSION CABLES:
For more information on which cable to use for your application, please see the extended chart at www.q-see.com/cableselection To purchase, order online at www.Q-SeeStore.com
CAMERA
TO CONNECT TO A SECURITY DVR SYSTEM:
STEP 1
Plug the power adapter into a surge 
protector *
*When selecting a surge protector, it is STRONGLY 
recommended to use one that is UL-1449 rated, for a 
clamping voltage of 330 or lower, a Joule rating of at least 
400 and a response time of 10 nanoseconds or less. 
STEP 5
IMPORTANT!
 When connecting the power and video cable 
between the camera and the DVR, the “male” power end (red plug) 
connects to the matching power lead on the camera.
STEP 2
Connect the BNC and power leads from the 
camera to the matching connectors on one 
For multi-camera packs, connect the 
power connector on the other end of the 
end of the power and video cable.
STEP 3
Plug the power splitter cable into the 
camera power adapter. 
DO NOT plug the 
adapter into an outlet at this time.
AUDIO IN
VIDEO IN
1
3
2
4
1
3
2
4
STEP 4
Connect the BNC connector 
on the other end of the 
power and video cable to a 
Video In port on the back 
of the DVR.
cable to the power splitter. 
For single camera packages, connect the power lead 
into the power adapter itself. In this case, you can skip to 
Step 4.
Connect the camera to the cable and power supply as 
described in Steps 1, 2 and 5 above before connecting it to 
your video display.
Q-See Model Number
QS60F (60’)
QS120F (120’)
QS50B (50’)
QS100B (100’)
QSVRG60 (60’)
QSVRG100 (100’)
QSVRG200 (200’)
QS59500 (500’)
QS591000 (1000’)
Maximum Run Length
180’
180’
800’
800’
Quality Output
Standard
Standard
High
High
Type
75Ω Video Cable
75Ω Video Cable
RG-59
RG-59
Shielded
No
No
Yes - UL Rated
Yes - UL Rated
Plenum Rated
No
No
No
No
Pre-Attached Connector      Video
RCA
BNC
BNC
BNC
Audio
RCA
N/A
N/A
N/A
Power
2.1mm
2.1mm
2.1mm
2.1mm
Usage
Indoor/Outdoor · Do not run inside walls or underground
Indoor/Outdoor ·  In-wall or along wall
Camera Compatibility
CMOS/CCD, RCA/BNC Connection
To maintain video quality:
·  Video quality is always enhanced by using shielded cables.
·  Always check state and local laws before installing cameras. (2011 NEC 820.44)
·  To prevent video signal loss, run one continuous cable between the camera and DVR for best results. If more length is 
required, use the minimum number of inter-connection points possible.
Other Notes:
·  If a cable run exceeds 800ft, 
we recommend using RG-6 
coaxial cable which is available 
at most retail building supply 
companies.
· If your home or business 
is pre-wired with CAT-5 
cable, then you can run up 
to 1000ft. (QSBAL2 Video 
Balun or Powered Balun 
are recommended for easy 
installation.
Repeat Steps 1 through 4 for all cameras 
before continuing.
WARNING!
 If you have a multi-
camera package, the included 
power adapter is designed to provide 
enough voltage to operate multiple cameras. 
Connecting a single camera to the adapter can 
cause the optical chipset of that camera to burn 
out and become useless.