Acer 4400 Mode D'Emploi
79
Installing Additional Memory
The three 168-pin sockets onboard support SDRAM-type
DIMMs. You may install 32-MB, 64-MB, or 128-MB (single and
double density) DIMMs for a maximum of 384-MB system
memory.
DIMMs. You may install 32-MB, 64-MB, or 128-MB (single and
double density) DIMMs for a maximum of 384-MB system
memory.
The SDRAM DIMMs should work under 3.3 volts only; 5-volt
memory devices are not supported. This system board
supports both PC-100 (100MHz) and PC-133 (133 MHz)
SDRAM. However, they cannot be used at the same time in a
system. Please contact your dealer for qualified DIMM
vendors.
memory devices are not supported. This system board
supports both PC-100 (100MHz) and PC-133 (133 MHz)
SDRAM. However, they cannot be used at the same time in a
system. Please contact your dealer for qualified DIMM
vendors.
Do not use both PC-100 (100 MHz) and PC-133 (133 MHz) SDRAM
together. Such a combination might cause your system to malfunction.
together. Such a combination might cause your system to malfunction.
Each of the DIMM sockets is independent from the others.
This independence allows you to install DIMMs with different
capacities to form different configurations.
This independence allows you to install DIMMs with different
capacities to form different configurations.
Ap4400-e.book Page 79 Friday, October 1, 1999 2:09 PM