Revel sub15 Mode D'Emploi

3. Start the spike feet (with trim rings) by hand (see Figure 3)

and tighten them with the enclosed wrench.

4. For use on hard floors, install covers onto the spike feet using

the supplied adhesive. Wait 20 minutes for the silicone to set.

5. When finished, place the ULTIMA SUB-15 upright and

remove the top pad. 

Trim

Ring

Top

Pad

SUB-15
(Bottom)

Bolt

Cover*

(optional for

hard floors)

Spike

Trim

Ring

Remove (2) Front Bolts;

Leave Trim Rings In Place

Install (3) Spikes (with Trim

Rings) Into Open Holes 

*NOTE: Apply a small bead of

supplied silicone adhesive into each

cover and fasten onto each spike.

Wait 20 minutes for silicone to set.