Plus bf-030 s Mode D’Emploi

CHECK LIST OF SIMPLE FAILURES

HANDLING PRECAUTIONS

7. When replacing recording paper, do not place any objects on the open printer

cover or do not put your elbows on it.

8. After use, make sure to turn OFF the power switch. In addition, when it is not to be

used for a long time, make certain that the plug of the power cord is pulled out form
the outlet.

9. Always use the correct type of marker. Be careful not to use other markers as the

sheet may be damaged or, in some cases, the ink may be difficult to remove.

10. Write within an area of a size that can be easily read.

<BEFORE ASKING FOR A REPAIR SERVICE>

CONDITIONS

CHECKPOINTS

If no satisfactory result can be achieved even after the above, contact the suppliers or our

company.

11. When moving this machine, turn OFF the caster lock switches, hold both the right

and the left sides of the main unit firmly, and avoid any sudden jolts or shocks.

When the power fails

When pressing copy key does not result
in copying

Although printer is functioning, nothing is
copied on recording paper

When characters written on board screen
cannot be rubbed out even by the use of
an eraser

When copy is dirty

Check if power cord is pulled out of outlet.

Check if paper warning lamp (red) is lit.

Check if winding direction of recording
paper is set on reverse. (No copying is
made on back of recording paper)

Check if any marker except the correct type
has been used. Wipe off with a damp cloth
or neutral detergent.

Check for ink residue on the screen. If it is
stained, wipe off carefully with a soft damp
cloth.

30mm

20mm