Panasonic aj-pd900 Manuel D’Utilisation

Page de 136
– 134 –
Specifications
VTR Section
VTR Video System 
(during playback on a standard playback unit)
Bands:
Y; 30 Hz to 5.75 MHz
o
1.0 dB/
p
3.0 dB
P
B
, P
R
; 30 Hz to 2.75 MHz 
o
1.0 dB/
p
3.0 dB
S/N ratio:
Better than 55 dB
K factor (2T pulse):
Within 2%
Y/C delay:
Within 20 ns
VTR Audio System 
(during playback on a standard playback unit)
Sampling frequency:
48 kHz (synchronized to video)
Quantization:
16-bits/sample
Frequency response:
20 Hz to 20 kHz
t
1.0 dB (at the reference level on MIC
LOWCUT OFF status of the Setting Menu)
Dynamic range:
85 dB or more (at 1 kHz, AWTD)
Distortion:
Within 0.1% (at 1 kHz, reference level)
Wow/flutter:
Below measurable limit
Head room:
20 dB
Emphasis:
T1
r
50 
Ø
s, T2
r
15 
Ø
s (can be turned ON/OFF)
VTR Tape Running System
Tape used:
DVCPRO format 1/4-inch M-size cassette tape
Tape speed:
67.640 mm/s (50 Mbps)
33.820 mm/s (25 Mbps)
Recording/playback time:
Approx. 33 min. (50 Mbps, using the AJ-P66MP)
Approx. 66 min. (25 Mbps, using the AJ-P66MP)
FF/REW time:
Approx. 3 min. (using the AJ-P66MP)
Connectors
Input
AUDIO IN CH1/CH2
(XLR
2, 3-pin, female):
MIC/LINE switchable, balanced, more than 10 kohm
MIC; Menu setting to 
p
60/
p
50/
p
40 dBu,
LINE; Menu setting to 
p
6/0/
o
4 dBu
MIC IN (XLR, 3-pin, female):
Phantom 
o
48 V, 
p
60 dB, balanced, 3 kohm
Menu setting to 
p
60/
p
50/
p
40 dBu
GENLOCK IN (BNC)
1.0 Vp-p, 75 ohm
TIME CODE IN (BNC):
0.5 to 18 Vp-p, high-impedance
Output
CAMERA OUT (BNC):
1.0 Vp-p, 75 ohm
VIDEO OUT (BNC):
1.0 Vp-p, 75 ohm
AUDIO OUT (CH1/CH2/MIX)
(XLR, 3-pin, male):
o
4 dBu, balanced, low-impedance
(CH1, CH2 or MIX selectable)
AUDIO CH1/CH2 OUT
(12-pin, multi connector)
(option):
p
20 dBu, unbalanced, low-impedance
TIME CODE OUT (BNC):
1.5 Vp-p, low-impedance
PHONES (mini-jack
2):
Other
DC IN (XLR, 4-pin, male):
DC 11–17 V
DC OUT (4-pin):
DC 11–17 V, maximum rated current; 0.1 A
LENS (12-pin):
REMOTE (ECU, 6-pin):
Accessories
Shoulder belt (1)
Sony battery connector (screws included)
Weight and dimensions shown are approximate.
Specifications are subject to change without notice.