Panasonic hd-ag-3dp1 Manuel D’Utilisation

Chapter

Men

Oper

ations

Item

Setting

Notes

REC FORMAT

Selects the recording codec as well as shooting and
recording modes.

• When SYSTEM MODE is 1080-59.94i:

An AVC-I 100 or AVC-I 50 codec is used for shooting
and recording. Recording and shooting can be
performed at 60i or 30PN (native recording) with each
codec.

AVC-I 100/60i
AVC-I 100/30PN
AVC-I 50/60i
AVC-I 50/30PN

• When SYSTEM MODE is 1080-23.98PsF:

AVC-I 100 or AVC-I 50 codec is used for shooting and
recording. Recording and shooting can be performed
at 24PN (native recording).

AVC-I 100/24PN
AVC-I 50/24PN

• When SYSTEM MODE is 1080-50i:

AVC-I 100 or AVC-I 50 codec is used for shooting and
recording. Recording and shooting can be performed
at 50i or 25PN (native recording) with each codec.

AVC-I 100/50i
AVC-I 100/25PN
AVC-I 50/50i
AVC-I 50/25PN

• When SYSTEM MODE is 720-59.94P:

An AVC-I 100 or AVC-I 50 codec is used for shooting
and recording. Recording and shooting can be
performed at 60P, 30PN (native recording) or 24PN
(native recording) with each codec.

AVC-I 100/60P
AVC-I 100/30PN
AVC-I 100/24PN
AVC-I 50/60P
AVC-I 50/30PN
AVC-I 50/24PN

•

When SYSTEM MODE is 720-50P:

An AVC-I 100 or AVC-I 50 codec is used for shooting
and recording. Recording and shooting can be
performed at 50P or 25PN (native recording) with each
codec.

AVC-I 100/50P
AVC-I 100/25PN
AVC-I 50/50P
AVC-I 50/25PN

REC MODE

Sets the recording mode of this unit.

3D:

Recording 3D images.

2D LL:

Recording the left-lens (L) image on two P2

cards inserted in P2 card slots L and R simultaneously.
• When the setting is changed, the message “TURN

POWER OFF” appears. Then turn the power off and
back on again.

• The following functions are disabled

when REC MODE is set to 2D LL.
-  LCD/EVF button
-  3D MODE selector switch
-  CONV. (convergence) dial
-  3D ASSIST buttons
-  3D FINE function

• Clip meta data and shot marks are

added to the clip in the P2 card in
card slot L.

____ indicates the factory setting