Panasonic PV-GS36 Mode D’Emploi
8
For assistance, please call : 1-800-211-PANA(7262) or, contact us via the web at: http://www.panasonic.com/contactinfo
• Before use, fully charge the Battery.
• Since the Battery will not be charged when
• Since the Battery will not be charged when
the DC Cable is connected to the AC Adaptor,
disconnect it from the AC Adaptor.
disconnect it from the AC Adaptor.
• The [CHARGE] Lamp lights up, and charging
starts.
• When the [CHARGE] Lamp goes off, charging
is completed.
1
Attach the Battery to the AC Adaptor and
charge it.
2
Attach the charged Battery to the
Camcorder.
1
Slide the [OPEN/EJECT] Lever
1
toward
the front and pull up to fully open the
Cassette Compartment Cover.
Cassette Compartment Cover.
• To protect the tape, if the cover is not fully
opened, the cassette holder cannot be ejected.
2
After the Cassette Holder is opened, insert
a Cassette.
3
Close the Cassette Holder by pressing the
[PUSH] mark
2
.
4
Only after the Cassette Holder is
completely housed, close the Cassette
Compartment Cover by pressing the mark
Compartment Cover by pressing the mark
3
.
2
1
Inserting a Card
2
Open the Card Slot Cover
3
.
3
While holding the Memory Card with its
cut corner facing right
4
insert it into the
Card Slot
5
.
4
Close the Card Slot Cover
3
securely.
3
1
Place your Thumb on the [OPEN]
1
Knob
and pull the LCD Monitor
2
out in the
direction of the arrow.
1
2
3
Quick Guide
Inserting a Cassette
Before using the Viewfinder, adjust the field of view
so that the displays inside the Viewfinder become
clear and easy to read.
so that the displays inside the Viewfinder become
clear and easy to read.
1
Pull the Viewfi nder.
Using the Viewfinder
Using the Battery
4
5
Turning on the Camcorder
How to Turn on the Power
1
Set the [OFF/ON] Switch to [ON] while
pressing the button
1
.
• The [STATUS] Indicator lights Red.
How to Turn off the Power
2
Set the [OFF/ON] Switch to [OFF] while
pressing the button
1
.
• The [STATUS] Indicator goes off.
1
1
• Open the LCD Monitor or extend the Viewfinder
before turning on the power.