Manualsbrain.com
  1. Manuels
  2. Marques
  3. Panasonic
  4. pv-gs34
  5. Manuel D’Utilisation

Panasonic pv-gs34 Manuel D’Utilisation

Télécharger
Page de 72
17
Before Using
With the LCD Monitor open, you can also record the 
picture while watching it.
1
  Place your Thumb on the [OPEN▼] Knob 
1
 and pull the LCD Monitor 
2
 out in the 
direction of the arrow.
•  The Viewfinder is now deactivated.
•  It can open up to 90°.
2
  Adjust the LCD Monitor angle according to 
the desired recording angle.
•  The LCD Monitor can rotate a maximum of 180° 
1
 from the vertical position upwards and a 
maximum of 90° 
2
 to the downward direction. 
Forcefully rotating the LCD Monitor beyond 
these ranges will damage the Camcorder.
„
 Closing the LCD Monitor
Push the LCD Monitor until it is securely locked.
•  Make sure the Card Slot Cover is closed.
2
1
1
180°
2
90°
Using the LCD Monitor
2
  Adjust by turning the Eyepiece Corrector 
Knob 
22
.
22
•  You can adjust the brightness of the Viewfinder from 
the Menu.
•  The brightness and color level of the LCD Monitor 
can be adjusted from the Menu.
•  If it is forcibly opened or rotated, the Camcorder may 
be damaged or fail.
•  Check that the Card Slot Cover is closed before 
closing the LCD Monitor.
•  When the LCD Monitor is rotated by 180° towards 
the lens (when recording yourself), the LCD Monitor 
and the Viewfinder will be simultaneously activated.
Using the Menu Screen
To facilitate the selection of a desired function or 
setup, this Camcorder displays various function setups 
on Menus.
1
  Press the [MENU] Button 
28
.
28
•  The Menu corresponding to the Mode selected 
by the Mode Dial 
32
 is displayed.
•  Do not switch the Mode Dial 
32
 when the Menu 
is displayed.
32
33
When [   LCD SET] or [   EVF SET] on the [   
SETUP] Sub-Menu is set to [YES], the following 
items are displayed.
[   LCD SET] LCD Brightness [   ]
Adjusts the brightness of the image on the LCD screen.
[   LCD SET] LCD Color Level [   ]
Adjusts the color saturation of the image on the LCD 
screen.
[   EVF SET] Brightness of the Viewfinder 
[ 
 ]
Adjusts the brightness of the image in the Viewfinder.
„
 To Adjust
Move the Joystick Control [▲] or [▼] and select the 
item to be adjusted, and then move the Joystick 
Control [◄] or [►] to raise or lower the number of 
vertical bars in the Bar Indication.
•  More vertical bars indicates stronger brightness or 
color saturation.
•  For other notes concerning this item, see page 59.
Adjusting Brightness and Color Level
LCD SET
     SET
SETUP   ENTER    EXIT
EVF SET
  SET   ENTER    EXIT
•  In order to adjust the brightness of the Viewfinder, 
close the LCD Monitor, and the Viewfinder will be 
activated.
•  These settings will not affect the images actually 
recorded.