Panasonic vdr-m53 Mode D'Emploi

Page de 170
142
If you insert an unformatted DVD-R disc in the DVD Video Camera. . . .
The following message is displayed on the camera monitor: “This disc must be formatted before it can be 
used by this camera”.
Follow these steps when authoring DVD-R discs with DVDfunSTUDIO. 
1
Press the 
g button to cancel formatting. 
Formatting discs at this time prevents you from 
using them with DVDfunSTUDIO. (However, 
formatted discs can be used for recording 
movies and shots and with the camera.) 
2
Start DVDfunSTUDIO. 
3
Choose Preference from the Tool menu. In DVD 
drive, choose the DVD Video Camera. 
Before closing the USB connection (disconnecting the USB cable) or toggling 
the power switch
You must follow the steps to stop the drive before disconnecting the USB cable from the computer or 
toggling between Disc Mode and Card Mode with the power switch while the USB cable is connected. 
lStopping the Drive
1
Close the application. In Windows, click the 
 
icon in the task tray (in the lower-right corner). 
2
Choose “Safely remove USB Mass Storage 
Device” (for Windows XP). 
A message will inform you that hardware may be 
disconnected. 
Close the application and make sure the camera 
access indicator is green before disconnecting 
the USB cable. 
lToggling the Power Switch
1
Disconnect the USB cable following the 
instructions in “Stopping the Drive” (see above).
2
You may now toggle the power switch.
3
Reconnect the DVD Video Camera to the 
computer with the USB cable.
VDR-M95M75M55M53PP.book  Page 142  Tuesday, March 29, 2005  2:19 PM