Panasonic vdr-m53 Mode D'Emploi
58
Macro Recording
Use the macro function when recording a small object from close-up position: You can shoot the subject
as close as approximately 13/16” (2 cm) from the lens surface, magnifying the image to fill the screen.
as close as approximately 13/16” (2 cm) from the lens surface, magnifying the image to fill the screen.
1
Aim the DVD Video Camera at the subject, and
press down the zoom lever to “W” control side.
press down the zoom lever to “W” control side.
Note
:
•
Zoom can be used, but the subject may not be focused,
depending on the distance to the subject. In this case,
move the zoom to “W” control side to focus.
depending on the distance to the subject. In this case,
move the zoom to “W” control side to focus.
•
The amount of light tends to be insufficient during macro
recording. If the subject image is too dark, use additional
lighting.
recording. If the subject image is too dark, use additional
lighting.
VDR-M95M75M55M53PP.book Page 58 Tuesday, March 29, 2005 2:19 PM