Panasonic th-47lf30 Mode D'Emploi

When both main unit buttons and remote control are disabled due to the “Button lock”, “Remocon User level” or “Remote 
ID” adjustments, set all the values “Off” so that all the buttons are enabled again.

Press the   button on main unit together with 

 button on the remote control and hold for more than 5 seconds. The 

“Shipping” menu is displayed and the lock is released when it disappears.

 30 

You can set the power-on delay time of the displays to reduce the power load, when you press 

 

 to turn 

on the multiple displays that are set together, for example, on MULTI DISPLAY system. 

Set each display’s setting individually.

Off:   

 

The display will be turned on at the same time as 

 

 is pressed.

1 to 30 (sec.):  Set the power-on delay time (second).

 

 

 

 

 After pressing 

 

, the display will be powered on with time delay depending on this setting.

Notes:
• During this function is working, the power indicator is blinking green.
• This function also works when the power recovers from failure or after plugging off and in again the power cord.

Off:  Not display the clock.

On: 

Display the clock.

The clock is displayed at the lower left of the screen when   button is pressed.
 

 

 

 

 

 

 

 

Note:  When “PRESENT TIME SETUP” is not set, the clock is not displayed even 

if “Clock Display” is “On” (see page 28)

 

 

10:00

Whether to show/hide No activity power off Precautions at the time of power ON is set.

On: 

The warning precautions are shown at the time of power ON.

Off:  The warning precautions are not shown at the time of power ON.

This setting is enabled only if “NO ACTIVITY POWER OFF” is “ENABLE” (see page 32). 

Set the functions that operates when 

 is pressed.

Signal: The “SIGNAL” menu is displayed.

Screensaver: The “SCREENSAVER” menu is displayed.

ECO menu: The “ECO MODE SETTINGS” menu is displayed.

Set up TIMER: The “SET UP TIMER” menu is displayed.

Factory settings are as follows.

FUNCTION1 button: Signal

FUNCTION2 button: Screensaver

The menu screen is displayed. (Example: Signal)

3D Y/C FILTER
COLOR SYSTEM

SIGNAL

ON

AUTO

3 : 2 PULLDOWN

OFF

[ VIDEO ]

NOISE REDUCTION

OFF

Press the FUNCTION button to exit from the menu.

Sets the lock setting for the display Power switch.

On: 

Power switch operation is disabled.

Off:  Power switch operation is enabled.