Panasonic th-60pf50 Guide De Spécification
60-inch class Full High Definition Plasma Display
TH-60PF50U
PMY05/22/2013
1/3
© Panasonic Corporation 2013
Product specification
(design and specification subject to change without notice)
LAN
RJ45 10 BASE-T/100 BASE-TX, Compatible with PJ Link
On Mode Average Power Consumption
*2
■DISPLAY
Screen Size (Diagonal)
60.1-inch (1,526 mm)
Aspec tratio
16:9
Effective Display Area (W x H)
52.3" x 29.4" (1,330 x 748 mm)
Number of pixels (H x V)
1,920 x 1,080 pixels (1 pixel=3cells for R, G and B)
Pixel Pitch (H x V)
0.03" x 0.03" (0.693 x 0.693 mm)
Contrast Ratio
5,000,000 :1
Gradation
6,144 steps (equivalent)
■CONNECTION TERMINAL
■CONTROL TERMINAL
VIDEO IN
BNC x 1
1.0 V [p-p] (75 Ω)
AUDIO IN (L/R)
RCA x 1 set (Shared with component IN) 0.5 V [rms]
COMPONENT/RGB IN
BNC x 3
Y/G : with sync 1.0 V [p-p] (75 Ω)
B/P
B/P
B
/C
B
,R/P
R
/C
R
: 0.7 V [p-p] (75 Ω)
AUDIO IN (L/R)
RCA x 1 set (Shared with Video IN)
0.5 V [rms]
HDMI IN
HDMI TYPE A connector x 1
DVI-D IN
DVI-D 24pin x 1
AUDIO IN
M3 jack x 1 (Shared with PC IN)
0.5 V [rms]
0.5 V [rms]
PC IN
MINI D-SUB 15pin x1 (Female)
Y/G
: with sync 1.0V [p-p] (75 Ω)
Plug & Play (VESA DDC 2B)
B/P
B
/C
B
, R/P
R
/C
R
: 0.7V [p-p] (75 Ω)
HD/VD
: 1.0~5.0 V [p-p] (high impedance)
AUDIO IN
M3 jack x 1 (Shared with DVI-D IN)
Wireless I/F
Wireless Module (ET-WM200) terminal x 1
SERIAL
D-SUB 9pin x 1 (EXTERNAL CONTROL TERMINAL), RS-232C COMPATIBLE
■ELECTRICAL
Power Requirements
110-127 V AC, 50Hz/60Hz
Power Consumption
515 W
approx. 285 W
approx. 285 W
Power off condition
approx. 0.2 W
Stand-by condition
approx. 0.4 W
■SOUND
EXT Speaker
6Ω 16 W [8 W + 8 W] (10 % THD)
■MECHANICAL
Dimensions (W x H x D)
56.5" x 33.6" x 3.9" (1,434 x 852 x 99 mm)
Carton Dimensions ( W x H x D)
63.4" x 39.7" x 13.2" (1,611 x 1,008 x 334 mm)
Weight
approx. 108 lbs. (49 kg)
Gross weight
approx. 136.7 lbs. (62 kg)
Cabinet Color
Black
*2: Based on IEC62087 Ed.2 measurement method.
Compliance with DVI Revision 1.0
Compatible with HDCP 1.1
Compatible with HDCP 1.1
without sync 0.7V [p-p] (75 Ω)
Panel Life
*1
approx. 100,000 hours
*1: Guideline operating hours before the panel brightness is reduced to half when the panel is used to display motion pictures in the Standard mode.
Afterimages (burned-in images) and malfunctions are not taken into consideration.
*2: An optional 3D IR Transmitter and 3D Eyewear are required for viewing 3D images.
Afterimages (burned-in images) and malfunctions are not taken into consideration.
*2: An optional 3D IR Transmitter and 3D Eyewear are required for viewing 3D images.
Full HD 3D
3D Full HD Ready
*2
3D shutter out
M3 jack x 1 (for 3D IR Transmitter)
DC 8V out for 3D IR Transmitter
Center Plus for EIAJ 4 mm Plug
Function Slot:SLOT 2.0
1 (Vacant)
INCLUDED ACCESSORIES
- AC power cord - Operating instruction book - CD-ROM x 1 - Remote control transmitter - Batteries
- Clamper x 1 - Ferrite core x 2
- Clamper x 1 - Ferrite core x 2
■ENVIRONMENTAL
Operating environment
Temperature:
32 F to 104 F (0 ℃ to 40 ℃)
Humidity
:
20 % to 80 % (Non condensation)
Altitude :
0 to 9,100 feet (0 to 2,800 m)
Storage environment
Temperature:
-4 F to 140 F (-20 ℃ to 60 ℃)
Humidity
:
20 % to 90 % (Non condensation)
Altitude :
0 to 10,800 feet (0 to 3,300 m)
■STANDARD (CERTIFICATIONS)
SAFETY REGULATIONS
UL60065, CAN/CSA-22.2 No 60065:03
RADIATION REGULATIONS
FCC Part 15 Class-B, ICES-003
■REMOTE CONTROL TRANSMITTER
Power Requirements
DC 3 V (2 x AA Size batteries)
Operation distance
approx. 23 ft (7 m) in front of plasma display
Weight
approx. 3.5 oz (100 g) including batteries
885170077553
UPC Code