Panasonic tc-p42g25 Mode D'Emploi

14

First time setup screen is displayed only when the TV is turned on for the first time after the power cord is 
inserted into a wall outlet and when “Auto power on” (p. 35) is set to “No”.

or

or

(Remote)

(TV)

 

Language / Idioma / Langue

English

Español

Français

Step 1 of 6 / Paso 1 de 6 / Étape 1 de 6

OK

Select

Selección

Sélection

 select

 OK

 

(Be sure to select “Home use”)

Step 2 of 6

RETURN

OK

Select

Set viewing mode

Home use

Store Demonstration

Please select your viewing environment. 
Select “Home Use” when using this TV in your 
home.

 select

 OK

  Please confirm your selection (Home Use) before pressing OK button.

No

You are selecting the store demonstration mode.

If you select “Yes”, the picture mode will regularly reset 
to “Vivid” and a Picture Refresh message will be displayed on the 
screen.

Yes

 select

 OK

  Select “No” and return to previous screen  .
  If you select “Yes”, Screen enters the store demonstration mode.

To display the “Set viewing mode” screen again as shown above and select 
“Home Use”, do one of the following:
• Press and hold down the side POWER button for at least five seconds.
• Unplug power cord for 30 seconds and plug it again.

 

 is not available on 

 - 

 

 is not available on 

.

  When you have used 

 to turn the TV off, the next time you turn the TV on the 

“Language” settings will be displayed.

  If you use any other step other than 

 to turn the TV off, or if you used the EXIT 

button to quit before completing the settings, the next time you turn the TV on “First 
time setup” will not be automatically displayed. 
• The settings up to that point are saved.
• You can reset the settings using “First time setup”. (p. 35)

  To change the setting (Language, ANT/Cable setup, Input labels, Clock) later, go to 

the Menu screen (p. 35)

tc_p42_46_50_54_g25_eng_0585.ind14   14

tc_p42_46_50_54_g25_eng_0585.ind14   14

2010/01/27   17:49:00

2010/01/27   17:49:00