Panasonic th-103pf10 Mode D'Emploi

Press to display the Setup menu.

Notes:
•  If “INPUT lock” in Options menu is set to other than “Off”, MULTI PIP function isn’t available.
•  Sound output is from the picture which is selected in Audio OUT (PIP) (see page 26).
•  In 2 screen display, the same input mode cannot be selected for the main picture and sub picture.
•  The main picture and sub picture are processed by different circuits, resulting in a slight difference in the clarity of the 

pictures. There may also be a difference in the picture quality of the sub picture depending on the type of signals displayed 
on the main picture and depending on the 2-picture display mode.

•  Due to the small dimensions of the sub pictures, these sub pictures cannot be shown in detail.
•  Computer screen picture is displayed in a simplifi ed format, and it may not be possible to discern details on them satisfactorily.
•  Following combinations of two analog signals cannot be displayed simultaneously;
  Component - Component, Component - PC (RGB), PC (RGB) - Component, PC (RGB) - PC (RGB)
•  Refer to each board's operating instruction for DVI, SDI, HDMI's corresponding signals.

Press repeatedly.
Each time pressing this 
button main picture 
and sub picture will be 
displayed as above.

Note:
To use 

, 

, 

, 

 buttons for the screen operations, follow the procedures in the previous page.

(When Advanced PIP is On)

One screen 

Advanced PIP

Main screen

Sub screen

1

2

3

6

5

4

Options 

On 

Weekly Command Timer 

Onscreen display 

Off 

Initial INPUT 
Initial VOL level 

1/3 

 

Off 

Off 

0 

0 

Maximum VOL level 

Off 

INPUT lock 

Off 

Button lock 

Off 

Remocon User level 

Off 

Advanced PIP 

Press to select “OSD Language”.

Press to select Advanced PIP.

Press to adjust the menu.
Off :  Sets normal two screen display mode 

(see page 22).

On : Sets Advanced PIP mode.

Press to confi rm.

Press and hold until the Options menu is displayed.

Press to exit from 
Options menu.