Panasonic th-50vx100 Mode D'Emploi

HDMI

INPUT

MENU

INPUT

MENU

OK

PC 

FULL 

English (UK)

Deutsch

Français

Italiano

ENGLISH (US)

Русский

OSD LANGUAGE

Español

Power 
Indicator

Remote Control 
Sensor

Fix the AC cord plug securely to the Plasma Display 
with the clamper. (see page 9) 

Note: 
When disconnecting the AC cord, be absolutely sure to 
disconnect the AC cord plug at the socket outlet first.

Press the Power switch on the Plasma Display to 
turn the set on: Power-On.

Power Indicator: Green

Press the 

 button on the remote control to turn the Plasma Display off.

Power Indicator: Red (standby) 

Press the 

 button on the remote control to turn the Plasma Display on.

Power Indicator: Green

Turn the power to the Plasma Display off by pressing the 

 switch on the unit, when the 

Plasma Display is on or in standby mode.

Note: 
During operation of the power management function, the power indicator turns orange in the power off state.

From the second time 
on, the below screen is 
displayed for a while (setting 
condition is an example).

Once the language is set, this screen won’t be displayed when switching on the unit next time.
After the setting, language selection can be done from the SET UP menu. (see page 14)

•
•

Following screen will be displayed when the unit is 
turned on for the first time.
Select the language with the remote control. Unit 
buttons are invalid.

1

 Select the language.

2

 Set.