Billion 7300gx Manuel D’Utilisation

 

 Keep Alive: Set Enable to allow the router automatically reconnects the connection 

when ISP disconnects it. 

 

 Connect to Demand: If you want to make UMTS/GPRS call only when there is a 

packet requesting access to the Internet (i.e. when a program on your computer 

attempts to access the Internet). In this mode, you must set Idle Timeout value at same 

time. Enabling Connect on Demand will give you an option of Idle Timeout. 

 Idle Timeout: Auto-disconnect the connection when there is no activity on this call 

for a predetermined period of time. The default value is 600 seconds, and Idle Timeout 

not allow be set under 10 seconds. 

 Obtain DNS Automatically: Select this check box to use DNS. 

  Primary DNS/ Secondary DNS: Enter the IP addresses of the DNS servers. The DNS 

servers are passed to the DHCP clients along with the IP address and the subnet mask. 

 

 

  5.3.2.3 ADSL Mode 

 

  ADSL Mode: There are four modes “Open Annex Type and Follow DSLAM’s 

Setting”, ”Annex A”, ”Annex L”,  ”Annex M” and “Annex J” that user can select for this 

connection. 

 Modulator: There are seven modes “AUTO”,”ADSL multimode”,”ADSL2”,”ADSL2+”, 

“G.Lite:”, “T1.413” and “G.DMT” that user can select for this connection.