Manualsbrain.com
  1. Manuels
  2. Marques
  3. Billion
  4. 6404VGP
  5. Manuel D’Utilisation

Billion 6404VGP Manuel D’Utilisation

Télécharger
Page de 103
VoIP/(802.11g) Broadband Firewall Router 
 
Chapter 4: Configuration 
 
 
Analog Telephone Adaptor (ATA) vs. VoIP Router Functional Comparison Table   
Note: For ATA device 
management. When 
configuring to ATA mode, 
to be sure you renew your 
PC IP to be in the same 
subnet as your ATA.   
Fail to do renew your PC 
IP will block you from 
accessing the router 
device.  If problem 
persists, please RESET 
your router to its factory 
settings (pushing the 
RESET more than 6 
seconds).  
 
 
 
 
 
 
 
 
Functions 
ATA 
VoIP Router 
LAN  
Disabled Active 
NAT 
Turn OFF 
Turn ON 
DHCP Server 
Turn OFF 
Turn ON 
Device IP   
0.0.0.0 / 0.0.0.0 
192.168.1.254 / 24 
WAN  
Disabled  
Active 
System  
Disabled 
Active 
Firewall  
Disabled  
Active 
QoS 
Disabled  
Active 
Virtual Server 
Disabled  
Active 
Time Schedule   
Disabled  
Active 
Advanced 
Disabled  
Active 
 
Here is detailed WAN Type description for your reference.   
DHCP 
(Obtain an  IP 
Address 
Automatically) 
Configure this WAN Interface to use DHCP client protocol to get an IP address 
from your ISP automatically.    Your ISP provides an IP address to the router 
dynamically when logging in.   
 
Static IP 
(Fixed IP Address) 
Configure this WAN interface with a specific IP address.  This IP address 
should be provided by your ISP.   
PPPoE 
PPPoE (PPP over Ethernet) is known as a dial-up DSL or cable service.    It is 
designed to integrate the broadband services into the current widely deployed, 
easy-to-use, and low-cost dial-up-access networking infrastructure.   
 
27