KYOCERA FS-C5016N Guide De Montage
Color Registration Correction Chart
L
-9
-8
-7
-6
-5
-4
-3
-2
-1
-8
-7
-6
-5
-4
-3
-2
-1
0
+1
+2
+3
+4
+5
+6
+7
+8
+9
+2
+3
+4
+5
+6
+7
+8
+9
Setting the Color Registration
When using the printer for the first time
after set-up, perform the color
registration on the printer’s operation
panel using the following method.
after set-up, perform the color
registration on the printer’s operation
panel using the following method.
Press the
H or I key
repeatedly until >Color
Registration >
Registration >
appears.
Press the MENU key.
Press the
H or I key
repeatedly until Others >
appears in the message
display.
appears in the message
display.
Press the
M key.
Press the
M key.
Press the ENTER key. A
question mark (?) appears.
question mark (?) appears.
Press the ENTER key.
Processing
Processing
will appear and a
color registration correction
chart will be printed out.
chart will be printed out.
There are left (L), horizontal (H)
and right (R) registration charts
for each color (cyan, magenta
and yellow) included on the
color registration correction
chart.
and right (R) registration charts
for each color (cyan, magenta
and yellow) included on the
color registration correction
chart.
The display returns to
4A=@O.
Perform steps 1 through 5
above once again.
Press the
above once again.
Press the
H or I key
repeatedly until >>Adjust
Cyan
Cyan
appears.
Press the ENTER key. 0 or 00
will be displayed for each value
and the cursor will flash under
the left (L) value.
will be displayed for each value
and the cursor will flash under
the left (L) value.
Look at the left chart (L) in the
cyan portion of the color
registration correction chart that
you printed out in step 8. Find
the two lines that most seem to
overlap as a single straight line
and note the number value
listed there. In the example
below the value would be -2.
(Be careful of plus [+] and
minus[-] numbers.)
cyan portion of the color
registration correction chart that
you printed out in step 8. Find
the two lines that most seem to
overlap as a single straight line
and note the number value
listed there. In the example
below the value would be -2.
(Be careful of plus [+] and
minus[-] numbers.)
Press the
H or I key until that
value is displayed.
Use the
L and M keys to move
the cursor right and left.
Perform the same operation as
you did for the left (L) value in
order to find the horizontal (H)
and right (R) values for cyan in
the color registration correction
chart, and select those values
on the operator panel as well.
Perform the same operation as
you did for the left (L) value in
order to find the horizontal (H)
and right (R) values for cyan in
the color registration correction
chart, and select those values
on the operator panel as well.
Press the ENTER key. OK? will
appear. If all of the displayed
values are correct, press the
ENTER key. Color registration
for cyan is complete.
appear. If all of the displayed
values are correct, press the
ENTER key. Color registration
for cyan is complete.
Press the
I key. >>Adjust
Magenta
will appear and,
once you complete the
settings for that color,
>>Adjust Yellow
settings for that color,
>>Adjust Yellow
will
appear as well.
Perform the same operation
as you did for the cyan chart
in order to find the values for
magenta and yellow in the
color registration correction
chart, and perform those
settings in the same way.
as you did for the cyan chart
in order to find the values for
magenta and yellow in the
color registration correction
chart, and perform those
settings in the same way.
Once you have completed the
settings for all 3 colors, press
the MENU key. The display
returns to Ready.
settings for all 3 colors, press
the MENU key. The display
returns to Ready.
Color registration is now
complete.
complete.
If the problem of skewed-
color printout still persists
even after correcting the
color registration, call for
service.
color printout still persists
even after correcting the
color registration, call for
service.
For more information about the printer, refer to the Operation Guide (PDF) in the CD-ROM supplied with the printer.
Printed in Japan 7KKTA80E++AC 2004.2
>>Print Regist Chart
will
appear.
2003, 2004 by KYOCERA MITA Corporation All rights reserved. 2-28, 1-Chome, Tamatsukuri, Chuo-ku, Osaka 540-8585, Japan
Caution
For verification purposes,
print out the color
registration correction chart
once again. If “0” is not the
value that corresponds to the
two lines that most seem to
overlap as a single straight
line, perform the operation
from step 9 once again.
print out the color
registration correction chart
once again. If “0” is not the
value that corresponds to the
two lines that most seem to
overlap as a single straight
line, perform the operation
from step 9 once again.
Others >
>Color >
Registration
>>Print
Regist Chart
>>Adjust Cyan
L= H= R=
>>Print
Regist Chart ?
OK?
L=-2 H= 00 R=+1
>>Adjust Cyan
L=-2 H= 00 R= 0
>>Adjust Cyan
L= 0 H= 00 R= 0
The same color registration
procedure must be performed
for magenta and then yellow.
procedure must be performed
for magenta and then yellow.
Note
4
1
2
3
5
6
7
8
9
10
11
12
13
14
15
16