Panasonic kx-taw848 Mode D'Emploi
1.1 Before Operating the Telephones
User Manual
15
When You Use a Panasonic Proprietary Telephone
If you use a Panasonic proprietary telephone and the Console, they may have some of the useful
feature buttons described below. For a PS user, refer to "Operating Instructions" for PS. These
buttons make operations simple. The illustrations may differ from the buttons on your telephone.
feature buttons described below. For a PS user, refer to "Operating Instructions" for PS. These
buttons make operations simple. The illustrations may differ from the buttons on your telephone.
Fixed Buttons
CO:
Used to make or receive an outside
call. (Button assignment is required.)
Also used as feature buttons. (Button
assignment is required.)
(Only the CO line "number" [e.g., 1, 2]
may be shown on some telephones.)
Used to make or receive an outside
call. (Button assignment is required.)
Also used as feature buttons. (Button
assignment is required.)
(Only the CO line "number" [e.g., 1, 2]
may be shown on some telephones.)
SP-PHONE:
Used for hands-free operation.
Used for hands-free operation.
AUTO DIAL/STORE:
Used for System/Personal Speed
Dialing or storing program changes.
Used for System/Personal Speed
Dialing or storing program changes.
PAUSE:
Used to insert a pause when storing a
telephone number. This button also
functions as the PROGRAM button
when there is no PROGRAM button on
your telephone.
Used to insert a pause when storing a
telephone number. This button also
functions as the PROGRAM button
when there is no PROGRAM button on
your telephone.
REDIAL:
Used to redial the last dialed number.
Used to redial the last dialed number.
MESSAGE:
Used to leave a message waiting
indication or call back the party who left
the message waiting indication.
Used to leave a message waiting
indication or call back the party who left
the message waiting indication.
INTERCOM:
Used to make or receive intercom
calls.
Used to make or receive intercom
calls.
AUTO ANS (Auto Answer)/MUTE:
Used to receive an incoming call in
hands-free mode or mute the
microphone during a conversation.
Used to receive an incoming call in
hands-free mode or mute the
microphone during a conversation.
MONITOR:
Used for hands-free dialing. You can
monitor the party’s voice in hands-free
mode.
Used for hands-free dialing. You can
monitor the party’s voice in hands-free
mode.
HOLD:
Used to place a call on hold.
Used to place a call on hold.
TRANSFER:
Used to transfer a call to another party.
Used to transfer a call to another party.
CONF (Conference):
Used to establish a multiple party
conversation.
Used to establish a multiple party
conversation.
FLASH/RECALL:
Used to disconnect the current call and
make another call without hanging up.
Used to disconnect the current call and
make another call without hanging up.
Call Forwarding (FWD)/Do Not
Disturb (DND):
Used to perform Call Forwarding
(FWD) or Do Not Disturb (DND).
Disturb (DND):
Used to perform Call Forwarding
(FWD) or Do Not Disturb (DND).
(CO)
SP
SP-PHONE
MONITOR
MONITOR
FLASH/RECALL