Panasonic KX-TG5230 Mode D'Emploi
Answering
System
Preparatio
n
65
For assistance, please call: 1-800-211-PANA(7262)
T
e
lephone System
Useful Info
rmation
Canceling Registration/Re-registration
Canceling the Handset Registration
If you no longer need to use the handset or if you want to use the handset with a
different base unit of the same model, it is necessary to cancel the handset’s
registration from the current base unit.
Only one handset can be canceled at a time.
Make sure the handset and the base unit near each other and are not being
used.
different base unit of the same model, it is necessary to cancel the handset’s
registration from the current base unit.
Only one handset can be canceled at a time.
Make sure the handset and the base unit near each other and are not being
used.
• “[-]” is shown on the top right of the display.
• After canceling registration, the handset cannot be used. If you want to use it
• After canceling registration, the handset cannot be used. If you want to use it
again, register the handset to the base unit by performing steps 5 and 6 on
page 66.
page 66.
Re-registering the Handset
If you want to re-register the handset to the base unit or a different base unit of the
same model, you need to register it to that base unit. The handset will be given a new
extension number of that base unit. Only one handset can be registered at a time near
the base unit.
same model, you need to register it to that base unit. The handset will be given a new
extension number of that base unit. Only one handset can be registered at a time near
the base unit.
1
Press [MENU].
2
Scroll to “Initial setting” by pressing
[d] or [B], then press the soft key (
).
3
Scroll to “Registration” by pressing [d]
or [B], then press the soft key (
).
4
Scroll to “Deregistration” by pressing
[d] or [B], then press the soft key (
).
5
Press [3][3][5] to delete the registration
memory.
memory.
• If you enter a wrong code, re-enter [3][3][5].
6
Press the soft key (
).
• The registration memory will be erased on both
the handset and the base unit.
• If the handset beeps 3 times, you entered a
wrong code. Enter “335”, then press the soft key
(
(
).
• To register the handset to another base unit of
the same model, start from step 5 on page 66.
Handset
SELECT
Initial setting
SELECT
Registration
SELECT
Deregistration
Deregistration
Enter code:335
:335
O K
O K
SPIPRIVACY
1
Handset [2]
Deregistered
IN USE
[-]
Ex. Extension number 2
Handset & Base Unit
TG5230.fm Page 65 Wednesday, February 4, 2004 9:51 AM