Panasonic kx-th1211 Mode D'Emploi
![Panasonic](https://files.manualsbrain.com/attachments/8f677e63fb64cbb6c62d09e6242996e7631380a8/common/fit/150/50/34d700d3fb727c767799b2da5cc474b219c0a4312e9e3044c99491a2fb9a/brand_logo.png)
Useful Information
49
For assistance, please visit http://www.panasonic.com/help
Programmable settings
Battery recharge
I cannot hear a dial tone.
L
Make sure the base unit’s AC adaptor is
connected properly (page 12).
connected properly (page 12).
L
Make sure that the LINK TO CELL indicator
lights green and the cellular phone is
connected to the base unit (page 18).
lights green and the cellular phone is
connected to the base unit (page 18).
L
Make sure the telephone line cord is
connected properly (page 12).
connected properly (page 12).
L
If you are using a splitter to connect the unit,
remove the splitter and connect the unit to the
wall jack directly. If the unit operates properly,
check the splitter.
remove the splitter and connect the unit to the
wall jack directly. If the unit operates properly,
check the splitter.
L
Disconnect the base unit from the telephone
line and connect the line to a known working
telephone. If the working telephone operates
properly, contact our service personnel to
have the unit repaired. If the working
telephone does not operate properly, contact
your service provider/telephone company.
line and connect the line to a known working
telephone. If the working telephone operates
properly, contact our service personnel to
have the unit repaired. If the working
telephone does not operate properly, contact
your service provider/telephone company.
The indicator on the handset
flashes slowly.
flashes slowly.
L
Problem
Cause/solution
I have changed the display
language to a language I
cannot read.
language to a language I
cannot read.
L
Change the display language (page 16).
While programming, the
handset starts to ring.
handset starts to ring.
L
A call is being received. Answer the call and
start again after hanging up.
start again after hanging up.
I cannot register a handset to a
base unit.
base unit.
L
The maximum number of handsets (6) is
already registered to the base unit. Cancel
unused handset registrations from the base
unit (page 34).
already registered to the base unit. Cancel
unused handset registrations from the base
unit (page 34).
L
Place the handset and the base unit away
from other electrical appliances.
from other electrical appliances.
Problem
Cause/solution
The handset beeps and/or
7
7
flashes.
L
Battery charge is low. Fully charge the
batteries (page 14).
batteries (page 14).
Problem
Cause/solution
TH12XX.book Page 49 Wednesday, January 30, 2008 3:05 PM