Panasonic kx-th1211 Mode D'Emploi
Preparation
13
For assistance, please visit http://www.panasonic.com/help
Charger
L
Use only the supplied Panasonic AC
adaptor PQLV209.
adaptor PQLV209.
Note:
L
L
The AC adaptor must remain
connected at all times. (It is normal for
the adaptor to feel warm during use.)
connected at all times. (It is normal for
the adaptor to feel warm during use.)
L
The AC adaptor should be connected
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
to a vertically oriented or floor-
mounted AC outlet. Do not connect
the AC adaptor to a ceiling-mounted
AC outlet, as the weight of the adaptor
may cause it to become disconnected.
During a power failure
The unit will not work during a power
failure. We recommend connecting a
corded-type telephone (without AC
adaptor) to the same telephone line or to
the same telephone line jack using a
Panasonic T-adaptor (page 6).
Emergency power can be supplied to the
unit by connecting a Panasonic battery
back-up power supply noted on page 6.
The unit will not work during a power
failure. We recommend connecting a
corded-type telephone (without AC
adaptor) to the same telephone line or to
the same telephone line jack using a
Panasonic T-adaptor (page 6).
Emergency power can be supplied to the
unit by connecting a Panasonic battery
back-up power supply noted on page 6.
If you subscribe to a DSL/ADSL
service
Please attach a DSL/ADSL filter (contact
your DSL/ADSL provider) to the
telephone line between the base unit
and the telephone line jack in the event
of the following:
– noise is heard during conversations.
service
Please attach a DSL/ADSL filter (contact
your DSL/ADSL provider) to the
telephone line between the base unit
and the telephone line jack in the event
of the following:
– noise is heard during conversations.
– Caller ID features do not function
properly.
Battery installation and
replacement
replacement
Important:
L
L
Use the supplied rechargeable
batteries (Part No. HHR-65AAABU).
batteries (Part No. HHR-65AAABU).
L
When installing the batteries:
– Wipe the battery ends (S, T) with
– Wipe the battery ends (S, T) with
a dry cloth.
– Avoid touching the battery ends
(S, T) or the unit contacts.
– Confirm correct polarities (S, T).
L
When replacing the batteries:
– USE ONLY rechargeable Ni-MH
– USE ONLY rechargeable Ni-MH
batteries AAA (R03) size.
– Do NOT use
Alkaline/Manganese/Ni-Cd
batteries.
batteries.
– We recommend using the
A
(120 V AC, 60 Hz)
Hooks
B
To single-line
telephone
jack (RJ11C)
telephone
jack (RJ11C)
DSL/ADSL filter
TH12XX.book Page 13 Wednesday, January 30, 2008 3:05 PM