Panasonic kx-th1211 Mode D'Emploi
Preparation
16
For assistance, please visit http://www.panasonic.com/help
Setting up the unit
before use
before use
Display language
You can select either “English” or
“Español” as the display language.
The default setting is “English”.
“Español” as the display language.
The default setting is “English”.
1
{
MENU} i {#}{1}{1}{0}
2
{V}
/{^}: Select the desired setting.
3
Press the right soft key to save. i
{
{
OFF}
Voice announcement
language
language
You can select either “English” or
“Español” as the voice announcement
language of the talking alarm clock and
talking battery alert. The default setting
is “English”.
“Español” as the voice announcement
language of the talking alarm clock and
talking battery alert. The default setting
is “English”.
1
{
MENU} i {#}{1}{1}{2}
2
{V}
/{^}: Select the desired setting.
3
{
Save} i {OFF}
Dialing mode
If you cannot make calls using the
landline, change this setting according to
your telephone line service. The default
setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
landline, change this setting according to
your telephone line service. The default
setting is “Tone”.
“Tone”: For tone dial service.
“Pulse”: For rotary/pulse dial service.
1
{
MENU} i {#}{1}{2}{0}
2
{V}
/{^}: Select the desired setting.
3
{
Save} i {OFF}
Date and time
1
1
{
MENU} i {#}{1}{0}{1}
2
Enter the current month, date, and
year by selecting 2 digits for each.
Example: July 15, 2008
{
year by selecting 2 digits for each.
Example: July 15, 2008
{
0}{7} {1}{5} {0}{8}
3
Enter the current hour and minute
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
{
(12-hour clock format) by selecting 2
digits for each.
Example: 9:30
{
0}{9} {3}{0}
4
{
AM/PM}: Select “AM” or “PM”.
5
{
Save} i {OFF}
Note:
L
L
When English is selected as the
display language, 12-hour clock
format is used. When Spanish is
selected, 24-hour clock format is
used.
display language, 12-hour clock
format is used. When Spanish is
selected, 24-hour clock format is
used.
L
To correct a digit, press {^}, {V}, {<},
or {>} to move the cursor to the digit,
then make the correction.
or {>} to move the cursor to the digit,
then make the correction.
L
The date and time may be incorrect
after a power failure. In this case, set
the date and time again.
after a power failure. In this case, set
the date and time again.
TH12XX.book Page 16 Wednesday, January 30, 2008 3:05 PM