Panasonic KX-TS4300 Mode D’Emploi
Useful Information
74
For assistance, please visit http://www.panasonic.com/phonehelp
Automated Attendant System/Answering system
Problem
Cause/solution
The unit does not
record new messages.
record new messages.
L
The answering system is off. Turn it on (see “Turning the
answering system on/off ” on page 57).
answering system on/off ” on page 57).
L
The caller’s message length is set to “Greeting Only”.
Select a different setting (see “Caller’s message length” on
page 64).
Select a different setting (see “Caller’s message length” on
page 64).
L
The message memory is full. Erase unnecessary
messages (see “Erasing a message” on page 61).
messages (see “Erasing a message” on page 61).
L
If you subscribe to the Voice Mail service, messages are
recorded by the telephone service provider not your
telephone (see “For Voice Mail service subscribers” on
page 64).
recorded by the telephone service provider not your
telephone (see “For Voice Mail service subscribers” on
page 64).
“Memory Full”
flashes on the display,
and no new messages
are recorded.
flashes on the display,
and no new messages
are recorded.
L
The message memory is full. Erase unnecessary
messages (see “Erasing a message” on page 61).
messages (see “Erasing a message” on page 61).
You cannot listen to
messages from a
remote location.
messages from a
remote location.
L
A touch tone phone is required for remote operation.
L
Enter the remote code correctly (see “Remote code” on
page 62).
page 62).
L
The answering system is off. Turn it on (see “Turning the
answering system on/off ” on page 57).
answering system on/off ” on page 57).
L
The answering system may not respond if the tones are too
short to activate the unit. Press each button firmly.
short to activate the unit. Press each button firmly.
L
If you enter the wrong remote code, hang up and then try
again.
again.
While recording a
greeting message, the
unit starts to ring and
stops recording.
greeting message, the
unit starts to ring and
stops recording.
L
A call is being received. Answer the call and start again
after hanging up.
after hanging up.
During playback,
incoming call tones are
heard.
incoming call tones are
heard.
L
A call is being received. Answer the call and start again
after hanging up.
after hanging up.
You have a difficulty in
intercepting a call
during message
recording.
intercepting a call
during message
recording.
L
“Intercept Call” is turned off. Turn it on (see “Turning
the intercept call on/off ” on page 58).
the intercept call on/off ” on page 58).
L
Use a phone connected to the line of the incoming call.
KXT4300_OI.book Page 74 Friday, September 1, 2006 8:51 AM