Sony cdx-gt820ip Manuel
15
Other functions
Changing the sound settings
Adjusting the sound
characteristics
characteristics
1
Press the select button.
2
Rotate the control dial until the
desired menu item appears, then
press the select button.
desired menu item appears, then
press the select button.
3
Rotate the control dial to select the
setting, then press the select button.
The setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
setting, then press the select button.
The setting is complete.
After 3 seconds, the setting is complete and
the display returns to normal play/reception
mode.
The following items can be set (follow the page
reference for details):
“
reference for details):
“
z
” indicates the default settings.
*1 When tuner is selected as the source, the default
setting is “off.”
*2 When AUX source is activated.
Customizing the equalizer curve
— EQ3 Tune
— EQ3 Tune
“Custom” of EQ3 allows you to make your own
equalizer settings.
equalizer settings.
1
Select a source, then press the select
button.
button.
2
Rotate the control dial to select “EQ3
parametric,” then press the select
button.
parametric,” then press the select
button.
3
Rotate the control dial to select
“Custom,” then press (SEEK) +.
“Custom,” then press (SEEK) +.
4
Rotate the control dial to select “EQ3
Mode Tune,” then press the select
button.
Mode Tune,” then press the select
button.
5
Rotate the control dial to select the
desired frequency range from “LOW,”
“MID” or “HI,” then press the select
button.
desired frequency range from “LOW,”
“MID” or “HI,” then press the select
button.
6
Rotate the control dial to select the
center frequency you wish to adjust,
then press the select button.
Selectable frequency in each range:
LOW: 60 Hz or 100 Hz
MID: 500 Hz or 1.0 kHz
HI: 10.0 kHz or 12.5 kHz
center frequency you wish to adjust,
then press the select button.
Selectable frequency in each range:
LOW: 60 Hz or 100 Hz
MID: 500 Hz or 1.0 kHz
HI: 10.0 kHz or 12.5 kHz
7
Rotate the control dial to adjust the
equalizer curve.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
equalizer curve.
The volume level is adjustable in 1 dB steps,
from –10 dB to +10 dB.
8
Press the select button.
Repeat steps 5 to 8 to adjust other frequency
ranges.
Repeat steps 5 to 8 to adjust other frequency
ranges.
9
Press
(BACK)
or
(SEEK) – twice.
The display returns to normal play/reception
mode.
mode.
To restore the factory-set equalizer curve,
select “EQ3 Mode Initialize” and “Yes” in
step 4.
select “EQ3 Mode Initialize” and “Yes” in
step 4.
Tip
Other equalizer types are also adjustable.
Other equalizer types are also adjustable.
EQ3 parametric
To select an equalizer type: “Xplod” (
z
),
“Vocal,” “Edge,” “Cruise,” “Space,” “Gravity,”
“Custom” or “off.”
“Custom” or “off.”
DSO*
1
To select the DSO mode: “1,” “2” (
z
), “3” or
“off.” The larger the number, the more enhanced
the effect.
the effect.
Balance
To adjust the balance between the right and left
speakers: “R10” – “0” (
speakers: “R10” – “0” (
z
) – “L10”
Fader
To adjust the balance between the front and rear
speakers: “F10” – “0” (
speakers: “F10” – “0” (
z
) – “R10”
Subwoofer
To adjust the subwoofer volume: “+10” – “0”
(
(
z
) – “–10”
(“–
∞” is displayed at the lowest setting.)
LPF (Low Pass Filter)
To select the subwoofer cut-off frequency: “off”
(
(
z
), “125Hz” or “78Hz.”
AUX Level*
2
To adjust the volume level for each connected
auxiliary equipment. This setting negates the
need to adjust the volume level between sources
(page 17).
Adjustable level: “+18dB” – “0dB” (
auxiliary equipment. This setting negates the
need to adjust the volume level between sources
(page 17).
Adjustable level: “+18dB” – “0dB” (
z
) –
“–8dB”