Sony CDX-GT740UI Manuel
18
Customizing the equalizer curve
— EQ3 Parametric Tune
— EQ3 Parametric Tune
“Custom” of EQ3 Parametric Preset allows you
to make your own equalizer settings.
Select “Custom” of EQ3 Parametric Preset.
to make your own equalizer settings.
Select “Custom” of EQ3 Parametric Preset.
1
Select a source, then press and hold
the control dial.
the control dial.
2
Rotate the control dial to select “EQ3
Parametric Tune,” then press it.
Parametric Tune,” then press it.
3
Setting the equalizer curve.
You can adjust the equalizer center frequency,
volume level and bandwidth in each range
from “Low,” “Mid”, or “Hi.”
You can adjust the equalizer center frequency,
volume level and bandwidth in each range
from “Low,” “Mid”, or “Hi.”
1
Rotate the control dial until the desired
menu item appears, then press it.
menu item appears, then press it.
2
Rotate the control dial to select the
setting, then press it.
setting, then press it.
Selectable frequency in each range:
Low: 60 Hz or 100 Hz
Mid: 500 Hz or 1.0 kHz
Hi: 10.0 kHz or 12.5 kHz
Low: 60 Hz or 100 Hz
Mid: 500 Hz or 1.0 kHz
Hi: 10.0 kHz or 12.5 kHz
Adjustable volume level: “+10 dB” –
“0 dB” – “–10 dB.”
“0 dB” – “–10 dB.”
Selectable “Q” settings in each range:
Low: “0.5,” “1.0,” “1.5,” or “2.0”
Mid: “0.75,” “1.0,” “1.25,” or “1.5”
Hi: “0.75,” or “1.25”
Low: “0.5,” “1.0,” “1.5,” or “2.0”
Mid: “0.75,” “1.0,” “1.25,” or “1.5”
Hi: “0.75,” or “1.25”
You can control “Q” (the width of the range
of affected frequencies) with this function.
of affected frequencies) with this function.
Repeat steps 1 and 2 to adjust other
frequency ranges.
frequency ranges.
4
Press
(BACK) twice.
The setting is complete and the display
returns to normal play/reception mode.
returns to normal play/reception mode.
To restore the factory-set equalizer curve, select
“Initialize” and “Yes” in step 3.
“Initialize” and “Yes” in step 3.
Tip
Other equalizer types are also adjustable.
Other equalizer types are also adjustable.
Fader & Balance
Fader
Adjusts the relative level: “Front:15”– “Center”
– “Rear:15.”
Balance
Adjusts the sound balance: “Right:15”–
“Center” – “Left:15.”
Adjusts the relative level: “Front:15”– “Center”
– “Rear:15.”
Balance
Adjusts the sound balance: “Right:15”–
“Center” – “Left:15.”
AUX Level*
2
Adjusts the volume level for each connected
auxiliary equipment: “+18 dB” – “0 dB” – “–8
dB.”
This setting negates the need to adjust the
volume level between sources.
auxiliary equipment: “+18 dB” – “0 dB” – “–8
dB.”
This setting negates the need to adjust the
volume level between sources.
*1 Hidden when EQ3 Parametric Preset is set to “off.”
*2 When AUX source is activated.
*2 When AUX source is activated.
60Hz
MID
HI
100Hz
500Hz 1.0kHz
10.0kHz 12.5kHz
LOW
-10dB
+10dB
0dB
Hz
Q=1.0 1.5
2.0
1.0
1.5
2.0
dB