ENVISION g912wa2 Mode D'Emploi
Engli
sh
Deutsch
Françai
s
Care and Maintenance
Care
z
Avoid exposing your monitor directly to sunlight or other heat source.
Place your monitor away from the sun to reduce glare.
Place your monitor away from the sun to reduce glare.
z
Put your monitor in a well ventilated area.
z
Do not place any heavy things on top of your monitor.
z
Make certain your monitor is installed in a clean and moisture-free area.
z
Keep your monitor away from magnets,motors,transformers,speakers,
and TV sets.
and TV sets.
Note
z Move the LCD out of the package and take off the plastic bag
z Move the LCD out of the package and take off the plastic bag
and polystyrene Foam.
z Pull the base from Parallel versus Panel to Vertical.
z Adjust the Panel within 0 degree leaning forward and 20 degree
z Adjust the Panel within 0 degree leaning forward and 20 degree
leaning backward.You must bend harder to exceed 20 degree
backward but this range is for packing the unit to a small size for
storage only.
backward but this range is for packing the unit to a small size for
storage only.
Safety Tips
z If smoke,abnormal noise or odor came out from your monitor,
z If smoke,abnormal noise or odor came out from your monitor,
caution you should remove the power cord immediately and call
your service center.
your service center.
z Never remove the rear cover of your monitor cabinet.The display
unit inside contains high-voltage parts and may cause electric
shock to human bodies.
shock to human bodies.
z Never try to repair your monitor yourself.Always call your service
center or a qualified technician to fix it.
Troubleshooting
No power
z
Make sure A/C power cord is securely connected to the power adapter
and the power supply is firmly connected to the monitor.
and the power supply is firmly connected to the monitor.
z
Plug another electrical device into the power outlet to verify that the
outlet is supplying proper voltage.
outlet is supplying proper voltage.
z
Make sure all signal cables are installed.
Power on but no screen image
z
Make sure the video cable supplied with the monitor is tightly secured to
the video output prot on back of the computer.If not,tightly secure it.
the video output prot on back of the computer.If not,tightly secure it.
z Adjust
brightness.
Worng or abnormal colors
z
If any colors(red,green,blue)are missing,check the video cable to make
sure it is securely connected.Loose or broken pins in the cable connector
could cause an improper connection.
sure it is securely connected.Loose or broken pins in the cable connector
could cause an improper connection.
z
Connect the monitor to another computer.
9