3com 3cr13500 Mode D'Emploi
2-6
3COM Security Switch 6200 Hardware and Software Users Guide
Installation
Tabletop
Mounting
Mounting
The system can be mounted on any desk or table top. To do this you first need
to attach the four rubber feet, supplied with the system, to the bottom of the
box. To do this, complete the following:
to attach the four rubber feet, supplied with the system, to the bottom of the
box. To do this, complete the following:
1.
Turn the system over onto its top with the bottom facing up.
2.
Locate the indented feet locators, as shown in the following figure.
3.
Peel backing off of the rubber feet and press them down firmly on
the indents.
the indents.
Once the rubber feet are installed you can mount the system on a solid
flat surface.
flat surface.
Place rubber feet here.