3com S7906E Manuel De Montage

1-40

Figure 1-10

Network diagram for MSTP configuration

2/0

Configuration procedure

1) VLAN and VLAN member port configuration

Create VLAN 10, VLAN 20, and VLAN 30 on Device A and Device B respectively, create VLAN 10,
VLAN 20, and VLAN 40 on Device C, and create VLAN 20, VLAN 30, and VLAN 40 on Device D;
configure the ports on these devices as trunk ports and assign them to related VLANs. The detailed
configuration procedure is omitted.

2) Configuration on Device A

# Enter MST region view, configure the MST region name as example, map VLAN 10, VLAN 30, and
VLAN 40 to MSTI 1, MSTI 3, and MSTI 4 respectively, and configure the revision level of the MST region
as 0.

<DeviceA> system-view

[DeviceA] stp region-configuration

[DeviceA-mst-region] region-name example

[DeviceA-mst-region] instance 1 vlan 10

[DeviceA-mst-region] instance 3 vlan 30

[DeviceA-mst-region] instance 4 vlan 40

[DeviceA-mst-region] revision-level 0

# Activate MST region configuration.

[DeviceA-mst-region] active region-configuration

[DeviceA-mst-region] quit

# Specify the current device as the root bridge of MSTI 1.

[DeviceA] stp instance 1 root primary

# Enable MSTP globally.

[DeviceA] stp enable

3) Configuration on Device B