3com S7906E Manuel De Montage

Page de 2621
 
1-18 
  VLAN passing  : 2, 6-50, 100 
  VLAN permitted: 2, 6-50, 100 
  Trunk port encapsulation: IEEE 802.1q 
 Port priority: 0 
 Last 300 seconds input:  0 packets/sec 0 bytes/sec 
 Last 300 seconds output:  0 packets/sec 0 bytes/sec 
 Input (total):  0 packets, 0 bytes 
          0 broadcasts, 0 multicasts 
 Input (normal):  0 packets, 0 bytes 
          0 broadcasts, 0 multicasts 
 Input:  0 input errors, 0 runts, 0 giants, 0 throttles 
          0 CRC, 0 frame, 0 overruns, 0 aborts 
          0 ignored, 0 parity errors 
 Output (total): 0 packets, 0 bytes 
          0 broadcasts, 0 multicasts, 0 pauses 
 Output (normal): 0 packets, 0 bytes 
          0 broadcasts, 0 multicasts, 0 pauses 
 Output: 0 output errors, 0 underruns, 0 buffer failures 
          0 aborts, 0 deferred, 0 collisions, 0 late collisions 
          0 lost carrier, 0 no carrier    
The output above shows that: 
The port (GigabitEthernet 2/0/1) is a trunk port. 
The default VLAN of the port is VLAN 100. 
The port permits packets of VLAN 2, VLAN 6 through VLAN 50, and VLAN 100 to pass through.  
Therefore, the configuration is successful.