3com S7906E Manuel De Montage

1-23

# Create an ISP domain named dm1 and enter its view.

[Switch] domain dm1

# Configure the ISP domain to use RADIUS scheme rs1.

[Switch-isp-dm1] authentication portal radius-scheme rs1

[Switch-isp-dm1] authorization portal radius-scheme rs1

[Switch-isp-dm1] accounting portal radius-scheme rs1

[Switch-isp-dm1] quit

# Configure dm1 as the default ISP domain for all users. Then, if a user enters the username without the

ISP domain at login, the authentication and accounting methods of the default domain will be used for

the user.

[Switch] domain default enable dm1

3) Configure the ACL (ACL 3000 ) for restricted resources and the ACL (ACL 3001) for unrestricted

resources

On the security policy server, you need to specify ACL 3000 as the isolation ACL and ACL 3001 as the

security ACL.

[Switch] acl number 3000

[Switch-acl-adv-3000] rule permit ip destination 192.168.0.0 0.0.0.255

[Switch-acl-adv-3000] rule deny ip

[Switch-acl-adv-3000] quit

[Switch] acl number 3001

[Switch-acl-adv-3001] rule permit ip

[Switch-acl-adv-3001] quit

4) Configure portal authentication

# Configure the portal server as follows:

Name: newpt

IP address: 192.168.0.111

Key: portal

Port number: 50100

URL: http://192.168.0.111/portal.

[Switch] portal server newpt ip 192.168.0.111 key portal port 50100 url

http://192.168.0.111/portal

# Enable portal authentication on the interface connecting the host.

[Switch] interface vlan-interface 100

[Switch–Vlan-interface100] portal server newpt method direct

[Switch] quit