3com S7906E Manuel De Montage

1-15

# Create VRRP group 1, and configure the virtual IP address of the group as 192.168.0.10; configure

the priority of Switch A in VRRP group 1 as 110; configure VRRP group 1 to monitor the status of track

entry 1. When the status of the track entry becomes Negative, the priority of Switch A decreases by 20.

[SwitchA] interface vlan-interface 2

[SwitchA-Vlan-interface2] vrrp vrid 1 virtual-ip 192.168.0.10

[SwitchA-Vlan-interface2] vrrp vrid 1 priority 110

[SwitchA-Vlan-interface2] vrrp vrid 1 track 1 reduced 20

[SwitchA-Vlan-interface2] return

4) Configure VRRP on Switch B

# Create VRRP group 1, and configure the virtual IP address of the group as 192.168.0.10.

<SwitchB> system-view

[SwitchB] interface vlan-interface 2

[SwitchB-Vlan-interface2] vrrp vrid 1 virtual-ip 192.168.0.10

[SwitchB-Vlan-interface2] return

5) Verify the configuration

# Display the detailed information of the VRRP group on Switch A.

<SwitchA> display vrrp verbose

IPv4 Standby Information:

Run Mode : Standard

Run Method : Virtual MAC

Total number of virtual routers : 1

Interface Vlan-interface2

VRID : 1 Adver Timer : 1

Admin Status : Up State : Master

Config Pri : 110 Running Pri : 110

Preempt Mode : Yes Delay Time : 0

Auth Type : None

Virtual IP : 192.168.0.10

Virtual MAC : 0000-5e00-0101

Master IP : 192.168.0.101

VRRP Track Information:

Track Object : 1 State : Positive Pri Reduced : 20

# Display the information of track entry 1 on Switch A.

<SwitchA> display track 1

Track ID: 1

Status: Positive

Notification delay: Positive 0, Negative 0 (in seconds)

Reference object:

BFD session:

Packet type: Echo

Interface : Vlan-interface2

Remote IP : 1.1.1.2

Local IP : 1.1.1.1

# Display the detailed information of the VRRP group on Switch B.

<SwitchB> display vrrp verbose

IPv4 Standby Information: