3com S7906E Manuel De Montage

 

1-9 

 

Specify the CVLAN for the 
VLAN mapping 

remark customer-vlan-id 
vlan-id-value 

Required 

Exit to system view 

— 

Create a QoS policy and enter 
QoS policy view 

qos policy policy-name 

Required 

Map the SVLAN to the CVLAN 
by associating the traffic class 
with the traffic behavior 

classifier tcl-name behavior 
behavior-name 

Required 

Exit to system view 

— 

 

z 

All service terminals of home users are using DHCP for obtaining an IP address. For how to get an 

IP address through DHCP, refer to DHCP Configuration in the IP Services Volume.  

z 

The CVLAN-to-SVLAN mappings have been planned.   

Follow these steps to configure a many-to-one VLAN mapping: 

Enter system view 

— 

Enable DHCP snooping 

Required 

Disabled by default. 

Create a VLAN 
and enter VLAN 
view 

vlan vlan-id 

Enable ARP 
detection 

Enable ARP 
detection on the 
CVLANs and the 
SVLAN for the 
VLAN mapping 

Exit to system 
view 

Required 

Disabled by default. 

Repeat these steps for 
all CVLANs and the 
SVLAN that the VLAN 
mapping involves. 

Configure an uplink policy to map the 
CVLANs to the same SVLAN 

Refer to 

Required 

Enter the interface view of the 
downlink port 

interface interface-type 
interface-number 

— 

Set the link type of the downlink port to 
trunk 

port link-type trunk 

Required 

Configure the downlink port to permit 
the specified CVLANs and SVLANs to 
pass through 

port trunk permit vlan 
{ vlan-id-list | all } 

Required 

By default, a trunk port 
permits only VLAN 1 to 
pass through.