3com S7906E Manuel De Montage
1-8
The remote source mirroring group on the source device and the remote destination mirroring group on
the destination device must use the same remote probe VLAN.
Configuring a Remote Source Mirroring Group (on the Source Device)
To configure a remote source mirroring group, make the following configurations on the source device:
Creating a remote source mirroring group
Follow these steps to create a remote source mirroring group:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Create a remote source
mirroring group
mirroring group
mirroring-group group-id
remote-source
remote-source
Required
By default, no mirroring
group exists on a device.
group exists on a device.
Configuring mirroring ports for the remote source mirroring group
You can configure a list of mirroring ports for a mirroring group at a time in system view, or assign only
the current port to it as a mirroring port in interface view. To assign multiple ports to the mirroring group
as mirroring ports in interface view, repeat the step.
z
Configuring mirroring ports in system view
Follow these steps to configure mirroring ports for the remote source mirroring group in system view:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Configure mirroring ports for
the remote source mirroring
group
the remote source mirroring
group
mirroring-group group-id
mirroring-port
mirroring-port-list { both |
inbound | outbound }
mirroring-port
mirroring-port-list { both |
inbound | outbound }
Required
By default, no mirroring port is
configured for a mirroring
group.
configured for a mirroring
group.
z
Configuring a mirroring port in interface view
Follow these steps to configure a mirroring port for the remote source mirroring group in interface view:
To do…
Use the command…
Remarks
Enter system view
system-view
—
Enter interface view
interface interface-type
interface-number
interface-number
—
Configure the current port as a
mirroring port
mirroring port
[ mirroring-group group-id ]
mirroring-port { both |
inbound | outbound }
mirroring-port { both |
inbound | outbound }
Required
By default, a port does not
serve as a mirroring port for any
mirroring group.
serve as a mirroring port for any
mirroring group.